ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: JDebler on November 22, 2012, 08:15:02 AM

Title: Proper Samurai Bushwacker / Wheel / Tire size combo/offset?
Post by: JDebler on November 22, 2012, 08:15:02 AM
For my Suzukalypse (http://www.suzukalypse.com) project, it looks like I am going to be going with Bushwacker 6" fender flares.  I want to make sure that I get the right size and offset wheel and tire combo.  I have done a lot of searching but I see a lot of conflicting information so I am still not 100% sure so I want to verify before I go ahead and start ordering parts.  I want the wheels and tires to fill the wells, but not stick out or be too inset.

I am thinking a 15" x 10" wheel, with a 30" or 31" tire (to go along with my 3" lift).  Is my thinking correct?  If so...what should the offset (or offset and spacer combo) be?

Thanks for any help!