General Safety Rules. [Finalized]

[poopman]

Yes mounted on the top bar of the cage. Thanks for the help I'm sure I'll have a few more questions next week when we get farther along

[ebewley]

Yes mounted on the top bar of the cage. Thanks for the help I'm sure I'll have a few more questions next week when we get farther along

Sounds good... Are you one of the three teams that Jay was talking about, or a different one? I'm trying to get a headcount

-Eric

[poopman]

1 of the 3 Jay was talking about

[2_Dogs_Ink]

Question...........


The lap belt nearest the tunnel (right hand side for driver and left hand side for passenger).  Does that attachment point need to be to the cage or is the factory attachment point OK?


Also, our pre-runner front bumper goes to a little past the center of the headlights, does it still have to be wrapped back to the frame? 

In order for it to 'hook' another vehicle it would have to pretty much destroy the front corner panel and have to fit in the space between the front bumper and the front of the tire.

[ebewley]

Question...........


The lap belt nearest the tunnel (right hand side for driver and left hand side for passenger).  Does that attachment point need to be to the cage or is the factory attachment point OK?


Also, our pre-runner front bumper goes to a little past the center of the headlights, does it still have to be wrapped back to the frame? 

In order for it to 'hook' another vehicle it would have to pretty much destroy the front corner panel and have to fit in the space between the front bumper and the front of the tire.

Factory attach points for the harness are OK as long as the belts won't get tangled or be cut during massive deceleration.   On the bumper, can you send me a pic? I think it'll be just fine... I too have bumpers that don't "loop around". this part of the spec is from the short course guys up in Canada and I'm not concerned with rubbin' while racing on this course. In fact, contact will be greatly discouraged...

-Eric

[2_Dogs_Ink]

Called and talked to Broc last night.  Sounds like a real nice guy.


Seatbelt question- we are all good.

Bumper question - he would like to see it wrapped back to the frame.


Eric, I will try and give you a call tomorrow.

[ebewley]

Called and talked to Broc last night.  Sounds like a real nice guy.


Seatbelt question- we are all good.

Bumper question - he would like to see it wrapped back to the frame.


Eric, I will try and give you a call tomorrow.

Yeah, Broc is cool...

Send me a photo of the bumper in question if you're concerned. I'm the tech guy for our class.

-Eric

[2_Dogs_Ink]

Took a couple of pics today.  Now to download and send them to ya

[2_Dogs_Ink]

[img][/img]







In the last pic I trimmed some more off.  Plan is to weld it closed.  Whatcha think?  It will pass?

[ebewley]

[img][/img]







In the last pic I trimmed some more off.  Plan is to weld it closed.  Whatcha think?  It will pass?

Hey Jay,

Yep, that'll pass no problem.

...looking good!

-Eric

[2_Dogs_Ink]

Great

One more thing crossed off the list.

[2_Dogs_Ink]

How about tail lights?  Do the tail lights need to be on during the race?  Or just the brake lights need to work and the amber light.


Thanks

[ebewley]

How about tail lights?  Do the tail lights need to be on during the race?  Or just the brake lights need to work and the amber light.


Thanks

I'd let brake lights with the amber light pass.

-Eric

[2_Dogs_Ink]

Thanks, another item crossed off the list. 


Getting closer to putting her on the trailer.