Hello Guest

87 Suzuki Samurai 1.6L 16v swap PART OUT

  • 6 Replies
  • 4225 Views

0 Members and 1 Guest are viewing this topic.

87 Suzuki Samurai 1.6L 16v swap PART OUT
« on: November 29, 2010, 05:33:20 PM »
For Sale: 1987 samurai jx
1.6L 16v tracker swap fuel injected 120hp
center force stg 2 clutch new
5-spd
t-case gears
tracker rear axle with disc brakes
TSL super swamper 31x13.50x15 3/4 tread
5.5" spoa lift
alum rear bumper with custom lights / hitch point
clean NY title i have a notary that will do the transfer

** winch not included with sale"

Tub/body
i plasma cut out all of the rust and welded in new 16 gauge steel
all 4 quarters were replaced with new 16ga steel
floors were fixed with 16ga

the remaining work is the drivers floor and rear wheel wells small patching. i should have it done by the weekend. then the tub will need to be seam sealed and rhino lined inside

Enigne
tracker swap 1.6L 16v FI runs great no issues rock road plug and play harness
adapter plates etc installed and runs and drives i drove the sammy home from ny 4 hours. ran good


extra parts
steering bar
2 sets of doors with glass and hardware
2 hoods
2 sets of seats
jx wire harness
extra set of pedals
extra brake master
extra wiper motor
extra steering wheel
extra drive shafts
too much to list

**ATTN this samurai must be hauled on a trailer home because the tub is not bolted to the frame **

Price 1800.00 NEG

call.text 814-341-9056 please text after 11:30pm

reason for selling is im in between jobs and i do not have the extra money to finish this build. and i could use the extra cash also.

please people no trades.
unless its a jeep Cherokee 4.0L auto thats not junk.prefer lifted

located in homer city PA 15748

« Last Edit: November 30, 2010, 12:04:36 PM by hondalowlow »

Re: 87 Suzuki Samurai 1.6L 16v swap,lifted etc look.
« Reply #1 on: November 30, 2010, 12:03:39 PM »
bump  anyone intrested i will part out if i half to  my furnace went today in my house now pretty much fucked.

i will part out if needed or sell whole

1.6L 16v swap FI  with rocky road wire harness and ecu 1000.00  that comes with center force stg2 clutch and custom mounts.

tub  with title will sell for 350   i fixed all the rust and its unbolted and easy to remove

frame - axles-driveline-steering-t-case-trans  400

i have spare front and rear drive shafts 75.00 each
spare intermidate driveshaft  75.00

spare doors
spare hood  has dent
spare steering wheel  brown
spare seat belts brown
master cyl
pedal assy  5-spd
jx cluster with tach  175.00

more to come    cal.text 814-341-9056

Re: 87 Suzuki Samurai 1.6L 16v swap PART OUT
« Reply #2 on: December 01, 2010, 07:25:33 PM »
BUMP  anyone???

if this 16v swap sells i will part out the whole sammy  it has tracker 5:13 3rd members etc   

price drop 1500 cash FIRM  take it all 

*

Offline z3ro

  • 339
  • 1
Re: 87 Suzuki Samurai 1.6L 16v swap PART OUT
« Reply #3 on: December 01, 2010, 07:38:40 PM »
You post this on Zuwharrie?  There's a lot more sammy owners in your neck of the woods on that board.

*

Offline jow003

  • 403
  • 2
  • Gender: Male
Re: 87 Suzuki Samurai 1.6L 16v swap PART OUT
« Reply #4 on: December 02, 2010, 05:38:56 AM »
t-case gears

are these in a case in working order?  ratio?
if a bigger hammer, bigger tires or more gas doesn't help... your doing it wrong.

BUY MY STUFF!! pm for details

87 Samurai...
5" SPOA/OTT -RRO
1.5" leaf springs-OME
RUF conversion-Trail Tough
1" shackles
33x1250x15 MTZs
15x8- DC-2s

Re: 87 Suzuki Samurai 1.6L 16v swap PART OUT
« Reply #5 on: December 02, 2010, 10:58:38 AM »
yeah the gears are in the case   but im not parting unless the motor sells

*

Offline jow003

  • 403
  • 2
  • Gender: Male
Re: 87 Suzuki Samurai 1.6L 16v swap PART OUT
« Reply #6 on: December 02, 2010, 02:53:35 PM »
heard, well if you sell it i might have a buddy that'll take it off your hands
if a bigger hammer, bigger tires or more gas doesn't help... your doing it wrong.

BUY MY STUFF!! pm for details

87 Samurai...
5" SPOA/OTT -RRO
1.5" leaf springs-OME
RUF conversion-Trail Tough
1" shackles
33x1250x15 MTZs
15x8- DC-2s