i would like to know how to make this 2x2 angle iron into rock sliders  for my Sami and how to mount them as well........

Try a search for slider at Ack's FAQ (the link is in my signature).

Both are fabbing articles that should give you some good ideas on the subject..

Hope this helps!

There is a quick description of making a set of sliders from some large angle located over here from a previous thread.

If you do a search on Sliders at the top of the page, you can find some really good writeups on what people have done.

Fairly simple







Just make sure you weld a round piece of steel the same size as your frame to the slider or the frame so it will spread the load and not rip your frame.