Hello Guest
« previous next »
Pages: [1]   Go Down

Air box mods on 16valve???

  • 7 Replies
  • 2186 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Mikerpm4x4

  • 2875
  • 12
  • Gender: Male
  • Redline... all the time!
    • www.rpm4x4.com
Air box mods on 16valve???
« on: March 24, 2003, 03:37:00 AM »
  Ive been thinking of modifing my airbox on my 97 tracker for more air flow. It has a 16 valve. Has anyone done this and if you have was it a noticable difference. Any downsides?

Mike
Logged
If your not living life to the fullest then your not living at all.

You wont really know if your wrong till your upsidedown
*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Re: Air box mods on 16valve???
« Reply #1 on: March 25, 2003, 10:48:41 PM »
Glen swears by the ARB snorkels. I spoke to a Sami owner at the Dixie Run (Tellico) last year that had a homemade snorkel, no airbox w/ K&N instet on top of it, and he swore by it. I also ran into a lowrider Kick in Cookeville that had a Acura Integra aftermarket tube in place of her Box (chrome 3 1/2 tube w/ K&N slip on filter, like on most built street racers) She also swore that it was a great improvement.
Logged
Zukipilot
'92 Liberty Overland Sidekick
*

Offline Luvmyzuki

  • 247
  • 0
  • Gender: Male
  • ZukiWorld Rocks!!!
Re: Air box mods on 16valve???
« Reply #2 on: March 26, 2003, 11:26:26 AM »
I was just wondering. What do they do with the MASS senors? I would like to have something other than the box in the samurai to take up less room.
Logged
*

Offline Mikerpm4x4

  • 2875
  • 12
  • Gender: Male
  • Redline... all the time!
    • www.rpm4x4.com
Re: Air box mods on 16valve???
« Reply #3 on: March 26, 2003, 02:24:51 PM »
 I am not a very big fan of K-N type filters. I have always found dirt making its way through up the intake tube. I was thinking more allong the lines of mabey using a stock type 98 Chevy Tahoe air filter. Its alot bigger and its a canister style which should make for an easier swap. I just dont want do mess with a good thing if my gas milage is going to suffer a lot.

Mike
Logged
If your not living life to the fullest then your not living at all.

You wont really know if your wrong till your upsidedown
*

Offline Mr._NSX

  • 155
  • 0
  • Gender: Male
Re: Air box mods on 16valve???
« Reply #4 on: January 17, 2004, 08:04:41 PM »
I'm looking into using some exhause tubing bent to replace the plastic intake hosing on a 16 valve.  connecting it with those rubber bushing things and band clamps and then putting a ricer style cone filter.  Hopefully this will keep out the water. :-/
Logged
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Air box mods on 16valve???
« Reply #5 on: January 17, 2004, 08:17:35 PM »
When I drilled mine it just made more noise,
no more power.
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline Tracker_Gt

  • 33
  • 0
  • Gender: Male
  • WOB WOB
Re: Air box mods on 16valve???
« Reply #6 on: January 17, 2004, 11:44:41 PM »
i put a cone filter on my stock 8v engine it didnt make any more power that i noticed any way but i did notice a big difference in my fuel economy its way way way better on gas now

oh and its a little noisy but only at full throttle other than that its about the same iam fixing my starter tomorrow and gonna see about doin my exhaust
Logged
1990 Tracker, 4x4, 5 speed, 1.6, 4 door springs custom exhaust, custom paint, 31/10.5/15  - (sold)

1992 sidekick, 4x4, 5speed, 16valve, 4door, 3" home made body lift, 235/85/16's, (lots of cutting)
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: Air box mods on 16valve???
« Reply #7 on: January 18, 2004, 02:25:07 AM »
If i wasn't runing a snorkle on my 8V then i would have put a hood scoop right in the lid to the air box and the cut a hole on the hood.  it would be like tha shackers of the 70s.  but don't forget to put a V-tec sticker on the side for an extra boost.  :P  lata stu
Logged
   
Pages: [1]   Go Up
« previous next »