Hello Guest
« previous next »
Pages: [1]   Go Down

95 Track 2-door handles

  • 3 Replies
  • 1107 Views

0 Members and 5 Guests are viewing this topic.

*

Offline Ira88888

  • 23
  • 0
95 Track 2-door handles
« on: July 26, 2009, 08:11:41 AM »
Well, two years ago I bought replacement handles just for this very day--my driver's side snapped off in my hand.

Can I just screw out the old assembly and screw in the new? Do I have to remove the door panels? Is this complicated?

I have a million errands to do today, and don't want to start this if I'm looking at a PITA project.

Thanks!
Logged
*

xkmail

Re: 95 Track 2-door handles
« Reply #1 on: July 27, 2009, 09:59:52 PM »
You can just unscrew the handle and not the door as long as you can reach the wire lever that connects from the handle to the door.
Sometimes putting on the little plastic clip holder on the wire lever is easier if you pull the door panel.
i found them on ebay maybe $10
Logged
*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: 95 Track 2-door handles
« Reply #2 on: July 29, 2009, 05:10:02 PM »
It's a 5 min job at most + one phillips screwdriver. The plastic bit that connects to the metal rod (you'll see) can be a PITA to get back onto the replacement. Just take your time, and keep your Chi centered.
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
*

Offline Lindenmooch

  • 560
  • 0
  • Gender: Male
  • Just another paranoid android.
Re: 95 Track 2-door handles
« Reply #3 on: July 29, 2009, 05:12:50 PM »
my chi is all messed up right now....   =/
Logged
Pages: [1]   Go Up
« previous next »