Hello Guest
« previous next »
Pages: [1] 2 3 ... 5   Go Down

I wrote a budget 4 door lift article..

  • 62 Replies
  • 12441 Views

0 Members and 2 Guests are viewing this topic.

*

Offline hcgalvin

  • 1695
  • 1
  • Gender: Female
  • Roads? Where we're going, we don't need roads.
    • Granite Path
I wrote a budget 4 door lift article..
« on: June 09, 2004, 06:17:08 AM »
Hey all... I'm in the middle of an article for a budget 4 Door lift on my site... check it out and tell me what you think so far!

http://www.whitepineclub.com/offroad/tech/budgetbodylift/index.htm

Thanks guys..

Heather

EDIT: I think I am done! Check it out!
« Last Edit: June 09, 2004, 08:22:12 AM by hcgalvin »
Logged
Heather Galvin
2005 GV with Zuki Nation 4.5" Lift.
Sidekick's gone... Still have Bob's Knob.
*

Offline Cwkick

  • 888
  • 0
  • Gender: Male
Re: I'm writing a budget 4 door lift article..
« Reply #1 on: June 09, 2004, 06:50:41 AM »
Very clear so far.  Great!

I think your average dumby could probably figure it out.

The drawings and pics. are very good and helpful.

Cwkick
Logged
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: I'm writing a budget 4 door lift article..
« Reply #2 on: June 09, 2004, 08:09:50 AM »
its nice but why won't it work on a 2 door?

stu
Logged
   
*

Offline hcgalvin

  • 1695
  • 1
  • Gender: Female
  • Roads? Where we're going, we don't need roads.
    • Granite Path
Re: I'm writing a budget 4 door lift article..
« Reply #3 on: June 09, 2004, 08:17:23 AM »
I dunno... it prolly will...  ::)

I just seem to only work on 4 doors  ???  :P  ;D

Heather
« Last Edit: June 09, 2004, 08:17:38 AM by hcgalvin »
Logged
Heather Galvin
2005 GV with Zuki Nation 4.5" Lift.
Sidekick's gone... Still have Bob's Knob.
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: I'm writing a budget 4 door lift article..
« Reply #4 on: June 09, 2004, 08:18:46 AM »
what about steering?

stu
Logged
   
*

Offline hcgalvin

  • 1695
  • 1
  • Gender: Female
  • Roads? Where we're going, we don't need roads.
    • Granite Path
Re: I'm writing a budget 4 door lift article..
« Reply #5 on: June 09, 2004, 08:20:24 AM »
Quote
what about steering?

stu



I didn't have to do anything with the steering on this truck (it's not power steering), and I didn't have to do anything with the steering on my truck (it IS power steering) either...  :o

so..

hum..

WHAT has to be done to the steering?   ???

Heather
« Last Edit: June 09, 2004, 08:20:59 AM by hcgalvin »
Logged
Heather Galvin
2005 GV with Zuki Nation 4.5" Lift.
Sidekick's gone... Still have Bob's Knob.
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: I wrote a budget 4 door lift article..
« Reply #6 on: June 09, 2004, 08:31:36 AM »
my 93 2 door has a shaft with out a slider joint in it.  some do, some don't.  i had to take my shaft out and weld an socket into it to make it right.

stu
Logged
   
*

TITAN

Re: I wrote a budget 4 door lift article..
« Reply #7 on: June 09, 2004, 09:27:08 AM »
why did u use xj or tj spacers...?


u can get 2 inch tracker ones at roadless gear...



http://www.roadlessgear.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=SM-CS-001&Category_Code=SU&Store_Code=RGL
« Last Edit: June 09, 2004, 09:28:22 AM by TITAN »
Logged
*

Offline explosivo

  • 3157
  • 0
  • Gender: Male
  • I'm in the northern part of that one state.
    • omghi2u Gen. Discussion Forums
Re: I wrote a budget 4 door lift article..
« Reply #8 on: June 09, 2004, 10:17:41 AM »
Dead link for me :(
Logged
omghi2.us[/url]
"Its a ZUKI thing. Doing more with less than less with more." -- HotRod
*

Offline ed oorklep

  • 637
  • 0
  • Gender: Male
  • 1992 Suzuki Vitara
    • Suzuki Vitara 4x4
Re: I wrote a budget 4 door lift article..
« Reply #9 on: June 09, 2004, 10:29:02 AM »
Haven't read it completely yet but I think it works on 2 doors as well, did mine about the same way (only without spring spacers, YET). And for the air filter hose being to short thingy, I put on an open air filter..... and soon a snorkel  ;D
BUT I like this page and will send it to everyone who ever has a question about body-lift or spacer lift  ;D THANKS Heather  ;D
Logged
http://www.suzukivitara4x4.nl
1992 Suzuki Vitara
8cm Body-lift, 33 12.5 R15 General Grabber MT's.
ARB Bull Bar.
3" Suspension lift.
*

TITAN

Re: I wrote a budget 4 door lift article..
« Reply #10 on: June 09, 2004, 10:38:03 AM »
Quote
Dead link for me :(



works for me? ???
Logged
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: I wrote a budget 4 door lift article..
« Reply #11 on: June 09, 2004, 10:41:57 AM »
oh about the air filter tube, i used one of the tubes off a 5.0 F-150.  you just cut it to lengh and work it over the out and inlets.  i used some oil to help it over.

stu
Logged
   
*

Offline hcgalvin

  • 1695
  • 1
  • Gender: Female
  • Roads? Where we're going, we don't need roads.
    • Granite Path
Re: I wrote a budget 4 door lift article..
« Reply #12 on: June 09, 2004, 11:07:20 AM »
Because, (if you don't like to wait for shipping...) you can find XJ or TJ coil spring spacers at most ANY 4x4 shop in any town, and they usually carry them in STOCK. And... I find they have been cheaper for me.

Heather

Quote
why did u use xj or tj spacers...?


u can get 2 inch tracker ones at roadless gear...



http://www.roadlessgear.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=SM-CS-001&Category_Code=SU&Store_Code=RGL

Logged
Heather Galvin
2005 GV with Zuki Nation 4.5" Lift.
Sidekick's gone... Still have Bob's Knob.
*

TITAN

Re: I wrote a budget 4 door lift article..
« Reply #13 on: June 09, 2004, 11:11:41 AM »
makes sense i never thoght about that one,....
Logged
*

Crabzuki

Re: I wrote a budget 4 door lift article..
« Reply #14 on: June 09, 2004, 11:33:42 AM »
Quote
my 93 2 door has a shaft with out a slider joint in it.  some do, some don't.  i had to take my shaft out and weld an socket into it to make it right.



stu
Stu here's what I did for the steering linkage and my welding's not bad either looked like a roll of nickles around the shaft, then I grounded the welds down and painted it black. If you have a spare shaft laying around I'd do it again for you. - CZ





Not bad since I haven't done any welding since 1995.  ;D

Logged
Pages: [1] 2 3 ... 5   Go Up
« previous next »