Hello Guest
« previous next »
Pages: [1]   Go Down

locking hub problems

  • 2 Replies
  • 1242 Views

0 Members and 1 Guest are viewing this topic.

*

Offline bruce5385

  • 26
  • 0
  • Gender: Male
  • 39.5 W/ 13" lift
locking hub problems
« on: March 09, 2008, 07:26:20 PM »
took the front end apart to service when i went to put it back together the axle shafts dont stick far enough out to get the snap ring on to hold the hub on.  what did i do wrong or what can i do?
Logged
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: locking hub problems
« Reply #1 on: March 09, 2008, 07:33:15 PM »
thread a bolt in the end of the axle , grab it with pliers it will pull out to where you need it to be
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: locking hub problems
« Reply #2 on: March 09, 2008, 08:00:20 PM »
Quote from: ROSS on March 09, 2008, 07:33:15 PM
thread a bolt in the end of the axle , grab it with pliers it will pull out to where you need it to be

Yep.

It's that simple...
Logged
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com
Pages: [1]   Go Up
« previous next »