Hello Guest

WANTED: 18% Underdrive Pulley for Samurai 1.3L

  • 6 Replies
  • 3269 Views

0 Members and 1 Guest are viewing this topic.

*

Offline 808SS

  • 18
  • 0
WANTED: 18% Underdrive Pulley for Samurai 1.3L
« on: May 26, 2010, 09:34:13 PM »
I really want to purchase an aluminum single-row Underdrive Crank Pulley for my 88.5 Samurai. Doing some research, I've found out that Rocky Road no longer carries the one they had from Rotational Dynamics Performance Parts. I also found Off Center Custom Racing (www.occracing.com) on the internet and I emailed them twice but they've yet to respond to me. Does anyone know how to get a hold of OCC Racing personnel?

Does anyone have one of these pulleys they can sell to me or know where I can purchase one?

*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: WANTED: 18% Underdrive Pulley for Samurai 1.3L
« Reply #1 on: May 28, 2010, 04:55:25 AM »
You could try posting on TeamSwift.net. Personally I'd be very wary about dealing with a company with a web site like that and no contact address or phone number.
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org

*

Offline oneal

  • 38
  • 0
Re: WANTED: 18% Underdrive Pulley for Samurai 1.3L
« Reply #2 on: May 28, 2010, 06:02:42 PM »
 I have one.Pulled off my old samurai 1.3,doin a 22r swap.I believe it's a RRO,it alum and blue anodized.

*

Offline 808SS

  • 18
  • 0
Re: WANTED: 18% Underdrive Pulley for Samurai 1.3L
« Reply #3 on: May 28, 2010, 11:18:18 PM »
oneal, tell me more about the one you have because I might be interested in getting it from you. Is it in very good condition? Do you have a picture of it? How did it perform on your engine?

*

Offline oneal

  • 38
  • 0
Re: WANTED: 18% Underdrive Pulley for Samurai 1.3L
« Reply #4 on: May 31, 2010, 05:07:35 AM »
oneal, tell me more about the one you have because I might be interested in getting it from you. Is it in very good condition? Do you have a picture of it? How did it perform on your engine?

 Some pics

*

Offline cj

  • 1276
  • 0
  • I drive a really big ATV
Re: WANTED: 18% Underdrive Pulley for Samurai 1.3L
« Reply #5 on: May 31, 2010, 02:17:08 PM »
You could try posting on TeamSwift.net. Personally I'd be very wary about dealing with a company with a web site like that and no contact address or phone number.

I have dealt with Adam from OCC a couple of times over the years and had no problems and I found out about him originally on TeamSwift. His product is very nice too, top quality. As I understand it this is just something he does on the side. He has not always been quick on the email reponse though and I must say that I enquired a couple of months ago for some more bits and haven't had a response.

*

Offline 808SS

  • 18
  • 0
Re: WANTED: 18% Underdrive Pulley for Samurai 1.3L
« Reply #6 on: June 07, 2010, 07:31:36 PM »
Does anyone else out there have an underdrive crank pulley for the 1.3L Samurai that they would be willing to part with? I can't seem to get a hold of the previous offer.