Hello Guest
« previous next »
Pages: 1 2 [3]   Go Down

Removing rear 3rd on Tracker

  • 31 Replies
  • 4895 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Quaddawg

  • 1622
  • 1
  • Gender: Male
  • Flex and Ground Clearance is HIGHLY overrated!!
    • My Ebay Store
Re: Removing rear 3rd on Tracker
« Reply #30 on: May 06, 2006, 05:55:14 AM »
Yes for the front, no for the rear, unless you grab the carrier too...  the 5.62's have a 10 bolt ring gear, and  93 and up have a 12 bolt carrier.
Logged
1996 Tracker Daily Driver, "The Flea"

Clicke HERE for Specs and Pics[/url]
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Removing rear 3rd on Tracker
« Reply #31 on: May 06, 2006, 09:29:45 AM »
Quote from: ERock on May 06, 2006, 04:10:42 AM
I get the idea that's a whole other story with setting things up which I can post if it ever happens. 

If you swap the R&Ps you will need to set up the clearances (backlash) in the diff and/or the pinion preload using a new crush sleeve. You might want to invest in an FSM if you're going to do that.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
Pages: 1 2 [3]   Go Up
« previous next »