Hello Guest
« previous next »
Pages: [1]   Go Down

Samurai front bearings

  • 2 Replies
  • 1658 Views

0 Members and 1 Guest are viewing this topic.

*

sanjuansheriff

Samurai front bearings
« on: January 07, 2008, 09:38:34 PM »
Hello folks,
I am in the middle of doing a rebuild of my front end including wheel bearings, king pin bearings, Knuckle seals, etc. I now can't remember if the outer wheel bearing had a grease seal on it. My manual doesn't mention installing one.... Could this correct?

Thanks for your help and expertise,
Dennis
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Samurai front bearings
« Reply #1 on: January 07, 2008, 09:54:56 PM »
No there is just one on the inner bearing, the out side bearing is sealed by the hub.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

sanjuansheriff

Re: Samurai front bearings
« Reply #2 on: January 08, 2008, 12:38:58 AM »
Thanks for the quick reply.... You've put my mind at rest.

Thanks again,
Dennis
Logged
Pages: [1]   Go Up
« previous next »