Hello Guest
« previous next »
Pages: [1]   Go Down

samurai tach

  • 5 Replies
  • 7680 Views

0 Members and 1 Guest are viewing this topic.

*

Offline slamurai

  • 1
  • 0
samurai tach
« on: September 22, 2008, 07:57:49 PM »
can anyone tell me the wiring i need to use in order to wire an aftermarket tach in a 1994 Suzuki samurai with fuel injection. it did not have a tach in it when new. thanks
Logged
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: samurai tach
« Reply #1 on: September 22, 2008, 09:11:00 PM »
The tach you picked up should come with some instructions,  It will connect up to your coil, quick and easy.  :)
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline Merlin93

  • 170
  • 4
  • Gender: Male
Re: samurai tach
« Reply #2 on: September 25, 2008, 08:20:42 PM »
Quote
  ... wire an aftermarket tach in a 1994 Samurai... ? 
   

For a SunPro 2 5/8" tach -- 4 wires: +12V, +12V dash lights, ground, ignition coil (Brown/White) on my '93. Fits perfectly in a 2.5" hole. Held in place with a bead of clear RTV around the mounting ring before insertion.
Logged
*

Offline sabum

  • 1
  • 0
Re: samurai tach
« Reply #3 on: June 09, 2010, 03:39:10 PM »
i have a 1994 samurai, i am putting a tach in, will the wiring be the same. can anybody show me a picture of the coil and the wiring, i have tried and i cannot get it to work . thank you.
Logged
*

Online fordem

  • 4326
  • 170
  • Gender: Male
Re: samurai tach
« Reply #4 on: June 10, 2010, 09:14:44 AM »
The wiring will probably be similar, and the only way to be certain is to get the manufacturer's instructions
Logged
'98 SQ420 Grand Vitara
'05 JB420 Grand Vitara
'16 APK416 Vitara
'21 A6G415 Jimny
*

Haptown

Re: samurai tach
« Reply #5 on: June 10, 2010, 05:30:22 PM »
Here is a link to a image that i have from my 91 EFI.  The blue wire (should be green on most) is from the tach and it connects to the brown (middle) wire on the connector. Just splice it in as the brown wire is still required by the ECM.

Tach-to_coil image


« Last Edit: June 10, 2010, 05:35:59 PM by Haptown »
Logged
Pages: [1]   Go Up
« previous next »