Hello Guest
« previous next »
Pages: [1]   Go Down

Trailtough transfer case install

  • 4 Replies
  • 1588 Views

0 Members and 1 Guest are viewing this topic.

*

Offline hightempsilicone

  • 3
  • 0
  • I Love ZUKIWORLD!
Trailtough transfer case install
« on: January 21, 2006, 09:46:28 AM »
Well I got the transfercase in but it is stuck in nuetral. Anybody have any suggestions?
Logged
*

Offline takai

  • 907
  • 0
  • Gender: Male
  • Yes, I drove that here. And No, it's not done!
Re: Trailtough transfer case install
« Reply #1 on: January 21, 2006, 01:36:34 PM »
Pull off the boot and take out the shifter. You should see two rods in the case. They are jammed. you should be able to pop them out with a big screwdriver. It will take a little bit of force but, the whole process, take apart, fix and put back together usually takes about 10 min. if you take your time.
Logged
87 Sammi "Sir Tweak " Rockcrawler 4:1, Mighty Kong , 1.6 16V, Centerforce II, 2" Exhaust, Esteem seats. - Long gone
97 Tracker "Jezebel"  Bone Stock DD

'Cause, I am to misbehave.
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Trailtough transfer case install
« Reply #2 on: January 21, 2006, 05:53:06 PM »
Sammy or SideKick
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline hightempsilicone

  • 3
  • 0
  • I Love ZUKIWORLD!
Re: Trailtough transfer case install
« Reply #3 on: January 21, 2006, 06:55:16 PM »
it is a sammy.

I got it, they were not aligned and almost impossible to move. After I did get them aligned the shifter would seat.

Thanks!
Logged
*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: Trailtough transfer case install
« Reply #4 on: January 21, 2006, 09:26:27 PM »
Quote from: hightempsilicone on January 21, 2006, 06:55:16 PM
it is a sammy.

I got it, they were not aligned and almost impossible to move. After I did get them aligned the shifter would seat.

Thanks!

If you didn't replace it, rush out in a BUYING FRENZY and get a fresh shifter sheet (that plastic donut piece the shifter ball sits in).  A number of the big internet vendors ( I like Hawks...) and your local Suzuki dealer has one -- usually for less than $20, often around $12 plus shipping.
Logged
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com
Pages: [1]   Go Up
« previous next »