Hello Guest
« previous next »
Pages: [1]   Go Down

weber carb

  • 1 Replies
  • 1120 Views

0 Members and 1 Guest are viewing this topic.

*

Offline boatsrcool

  • 4
  • 0
  • Gender: Male
weber carb
« on: January 04, 2012, 04:52:34 PM »
I put a weber carb on my 1.3 and I installed a pressure reducer and set it at 3.5lbs.  I could not get any fuel through the reducer.  I removed the reducer and it ran.  Will I run into problems doing this?  Is there an easy fix.
Logged
*

Offline rascott

  • 669
  • 15
  • Gender: Male
  • tread lightly monkeywrench a little
Re: weber carb
« Reply #1 on: January 04, 2012, 05:19:33 PM »
i have run a pressure regulator with my weber.
i set at 2lbs and had no problems( i think 3.5lbs is on the high side?).
mine was a simple empi brand regulator- cheap with bad reviews, but years of use is ok with me.
currently i am running just the stock mechanical pump(no regulator) with no problem.
what kind of regulator are you using?
Logged
'89 kick w/little motor, still got pieces of jeff's pucks, stan's sticks into 4.24:1 tcase, 31x10.5x15's, rear lockrite, kick power steering, some radios(kj6esv), bmw seat, other changes just because. done on the cheap.
suzi the psychic gets me fishing.
Pages: [1]   Go Up
« previous next »