ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: derekj on January 09, 2006, 11:02:26 PM

Title: roll on bedliner
Post by: derekj on January 09, 2006, 11:02:26 PM: just wondering what kind of luck people have had with the roll on bedliners. i want to do the back of the kick.

derek
Title: Re: roll on bedliner
Post by: wedge on January 10, 2006, 02:24:04 AM: I did my entire inside with it. Prepwork is the name of the game. mine is holding up well, but I need to redo the floor under the pedals, and one spot in the back where I dropped the tranny out of my silverado on it at a funny angle.

Also, have fun getting the sound deadening pad things up. They suck >:( Hurculiner works better than the generic stuff they sell, worth the extra money, and don't buy the install kit. Just the hurculiner, and use a standard roller to apply it.
Title: Re: roll on bedliner
Post by: locjaw on January 10, 2006, 12:38:34 PM: yeh, exactly what wedge said, but, watch out, it NEEDS to sit for a week after. the fumes hang around for quite some time, but it is AWSOME stuff.
jason
Title: Re: roll on bedliner
Post by: paps133 on January 10, 2006, 12:52:27 PM: HIPPO LINER FROM CANADIAN TIRE. i'VE HAD MINE FOR 2 YEARS NOW AND IT'S STILL HOLDING UP. THE OUT SIDE IS DONE ASWELL, THE SUN HAS FADED IT A LITTLE, BUT NOT MUCH. i'LL POST PICTURE WHEN I GET HOME FORM WORK.
Title: Re: roll on bedliner
Post by: AJMBLAZER on January 10, 2006, 04:29:11 PM: Quote from: wedge on January 10, 2006, 02:24:04 AM
Also, have fun getting the sound deadening pad things up.Ã‚Â They suck >:(

I'll agree with that...if you do it in the hot weather like I did on my '93 in the middle of summer a few years ago.Ã‚Â When it's nice and hot out that stuff is like hot asphault...wait, that's what it is... and is an absolute b%^ch to remove.Ã‚Â Then a while back I read someone's mention that the stuff just drops off in cold weather.Ã‚Â Sure enough, while putting the new top on my '90 last month the gyrations of my foot on the front floor's sound deadener just pushed it right off the floor.Ã‚Â So while it's freezing or colder I'll just get in there with my scraper and take it right off. 8)
Title: Re: roll on bedliner
Post by: Bigzook on January 10, 2006, 06:46:31 PM: 2 words......Use gloves. ;)
Title: Re: roll on bedliner
Post by: AJMBLAZER on January 10, 2006, 07:30:59 PM: Don't get any on your hootus. ;D

If you know what that means you've been reading 4x4 forums for a good while now, haven't yah? ;)
Title: Re: roll on bedliner
Post by: locjaw on January 10, 2006, 08:31:02 PM: Quote from: ElBurrobigzook on January 10, 2006, 06:46:31 PM
2 words......Use gloves. ;)
those are good words, i wore that shit for over a week ;D
jason
Title: Re: roll on bedliner
Post by: Dr_xXx on January 10, 2006, 11:18:14 PM: hi have pint all my floor whit stuff whit asphalt whit brush and im not satisfy...i have remake that whit BedLiner...its really really good stuff whit air gun and give me a really great finish nothing to scrap or remove this. i love my floor whit bedliner !!
Title: Re: roll on bedliner
Post by: Bigzook on January 11, 2006, 08:13:54 AM: Quote from: locjaw on January 10, 2006, 08:31:02 PM
Quote from: ElBurrobigzook on January 10, 2006, 06:46:31 PM
2 words......Use gloves. ;)
those are good words, i wore that shit for over a week ;D
jason
me also...