ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 37kicker on January 12, 2006, 05:26:32 PM

Title: rocker protection
Post by: 37kicker on January 12, 2006, 05:26:32 PM

is there any intrest in weld on 1/8 " diamond plate rocker panels for 2 door kicks? just curious if its worth my time to build more than a couple of sets for my own rigs.  i'm trying to get some good pixs to post.   stan

Title: Re: rocker protection
Post by: Quaddawg on January 12, 2006, 05:35:09 PM

I'd be interested in seeing them... I have little or no rocker left on DS, so I have just wrapped it with sheet metal for appearance, but will crush on first wheeling trip... was going to have a welder friend do rock sliders mounted to frame.. but would still be interested in seeing your rockers... and how and where they would need to be welded on....

and price.... ;)

Title: Re: rocker protection
Post by: ppltrak on January 12, 2006, 06:08:21 PM

I would also be interested in seeing them and then make a decision.


    Kevin

Title: Re: rocker protection
Post by: cj on January 12, 2006, 09:11:34 PM

Off topic but how are you going with the ball joint spacers?