ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Kp7 on January 21, 2006, 04:26:20 PM

Title: 97 sidekick 4x4
Post by: Kp7 on January 21, 2006, 04:26:20 PM

I own a 97 sidekick 4x4 and would like to add a 3 inch suspension, is there any welding or drilling involved. 

Title: Re: 97 sidekick 4x4
Post by: HotRod on January 21, 2006, 05:44:20 PM

Suspinion lift? No
BodyLift, yes.
Are you making your own suspinion lift or buying one?

Title: Re: 97 sidekick 4x4
Post by: Kp7 on January 21, 2006, 07:24:38 PM

I plan on buying one.  Not too sure which system to buy.  Also if I put a 3 in suspension lift can i fit 31's on my zuki?

Title: Re: 97 sidekick 4x4
Post by: HotRod on January 21, 2006, 07:34:52 PM

I've heard it being done.
Will need some fender trimming but it's easy.
pert much the whole Yellow section starting at the bodyline.
You'l have to bend a little lip flat adn you Can put the
inner fender panel back in and look stock(almost).

Title: Re: 97 sidekick 4x4
Post by: Kp7 on January 22, 2006, 07:15:51 AM

Would a coil spacer help with the clearance.

Title: Re: 97 sidekick 4x4
Post by: da_tub on January 22, 2006, 08:17:39 PM

yup   ( ;))