ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Quaddawg on February 02, 2006, 06:29:20 PM

Title: Help me identify 562's
Post by: Quaddawg on February 02, 2006, 06:29:20 PM

My wrecking yard has 8 trackers/kicks... which had the 5.62's? 

Title: Re: Help me identify 562's
Post by: wezzlegod on February 02, 2006, 08:13:15 PM

88 and 89 1300 carbarated

Title: Re: Help me identify 562's
Post by: Quaddawg on February 02, 2006, 08:21:55 PM

Ah, thanks... of course, I am pretty sure I am outta luck.. but I am still making the call!!

Title: Re: Help me identify 562's
Post by: locjaw on February 03, 2006, 07:32:31 AM

dreamer ;D
jason

Title: Re: Help me identify 562's
Post by: 1bigtracker on February 03, 2006, 09:35:52 AM

wana pick up a set for me too? :D :P

Stu

Title: Re: Help me identify 562's
Post by: Quaddawg on February 03, 2006, 11:06:22 AM

yep, it was a long shot, the oldest tracker they have is a 92.. but they do have at least 5 trackers there, one guy says they have 8.. .the other says 6.. but I have seen 5, and scrounged parts off 3 of them..

Hey, it was worth a shot.. you never know....    :'(

Title: Re: Help me identify 562's
Post by: Mythose on February 03, 2006, 01:45:41 PM

what is the easest way to tell which gearing is in your rig if you are uncertain? 

Title: Re: Help me identify 562's
Post by: cj on February 03, 2006, 01:52:02 PM

Put a vertical chalk mark on your tire where it contacts the ground and put a mark on your driveshaft. Roll the vehicle along the ground until the tire has done one complete revolution and at the same time count how many revolutions the driveshaft does eg. almost 5 & 1/2 would be a 5.38 but a bit past 5 & 1/2 would be 5.62. It's not exact but knowing the different ratios available for these diffs you should be able to tell which one is in yours.

Title: Re: Help me identify 562's
Post by: BigPig on February 03, 2006, 02:17:42 PM

The 5.62's look exactly like the ones in the Tracker I'm selling whole! :)
 

;D Buy my Tracker w/Gears and Locker! ;D

Title: Re: Help me identify 562's
Post by: Mythose on February 03, 2006, 04:08:25 PM

kewl i will do that to see.

Title: Re: Help me identify 562's
Post by: locjaw on February 03, 2006, 08:07:14 PM

i believe that the 5.62 gears only were in 88' and 89' 1300cc carberated rigs
fwiw
jason

Title: Re: Help me identify 562's
Post by: Quaddawg on February 04, 2006, 08:04:13 AM

Quote from: Big Pig on February 03, 2006, 02:17:42 PM

The 5.62's look exactly like the ones in the Tracker I'm selling whole! :)
 

;D Buy my Tracker w/Gears and Locker! ;D

Yeah!  DONE!  NOW,  if I an get MRfuelish to call or pm me back..... it will be a done deal..


NOW, I have a set of 5.12's, possibly with a locker or mini-spool for the rear... What are they worth?

I was thinking $225 for the 3rd's  and and extra $150 if there is a locker installed, or an extra $90 if there is a mini spool installed (haven't decided which to keep the spool or the lokrite)

Title: Re: Help me identify 562's
Post by: 95XL7 on February 04, 2006, 09:38:16 AM

Quote from: Quaddawg on February 02, 2006, 08:21:55 PM

Ah, thanks... of course, I am pretty sure I am outta luck.. but I am still making the call!!

Check www.car-part.com put in your area for the search and see what you come up with.