ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Grandmaster on February 06, 2006, 09:11:16 AM

Title: Rear Brake Pads
Post by: Grandmaster on February 06, 2006, 09:11:16 AM

So my Hot "Brake" light came on right beside the pretty "Check Engine" light. I replaced my front brake pads, apparently I have to do the rear's. How hard is it and can I do it with regular tools in a good amount of time?

Title: Re: Rear Brake Pads
Post by: tOnKa TrAcKeR on February 06, 2006, 09:18:22 AM

i have never heard of a "hot brake" light i have a "brake" light in my tracker that doubles as a parking brake and a low brake fluid light.

but Changing rear shoes is pretty easy but i would spend the little bit of money and buy the spring removal tools it makes it alot easier but you can do it with out them

jack up the rear and take both wheels off but only do 1 side at a time so you can use the other side as a guide

Title: Re: Rear Brake Pads
Post by: Grandmaster on February 06, 2006, 12:29:51 PM

Na i didnt mean hot like temp, i ment hot like wow this fucking this throws alot of codes.

Title: Re: Rear Brake Pads
Post by: bandit86 on February 06, 2006, 07:51:08 PM

only do one side at a time!!!!!!!!!! that way you have something to look at when you piece it back together.   it's pretty easy, I use sidecutters to remove all the springs and re install them. 

Title: Re: Rear Brake Pads
Post by: tOnKa TrAcKeR on February 07, 2006, 05:50:46 AM

Quote from: bandit86 on February 06, 2006, 07:51:08 PM

only do one side at a time!!!!!!!!!! that way you have something to look at when you piece it back together.   

thats what i said  ;D