ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Agent Orange on February 08, 2006, 10:43:11 AM

Title: 26-Spline vs. 22-Spline pass. CV
Post by: Agent Orange on February 08, 2006, 10:43:11 AM

OK last weekend I swapped out my aluminum housing & 3rd for a steel GV unit with a 26 spline carrier from a sport. during installation, instead of just changing the passenger CV right out I just changed the 26 spline cup that goes into the axle housing with one from a X-90. Everything seemed to swap straight over no problem. The next day the guy from the shop were I did the work, said he couldn't put the 22 spline cup onto the X-90 CV saying it was too small. He didn't try hard enough to make it fit, he just called me the other day saying he thinks we made a booboo with that swap.

Anybody know if there is a difference in size ?

Thanks

Title: Re: 26-Spline vs. 22-Spline pass. CV
Post by: 37kicker on February 08, 2006, 10:55:58 PM

the 22 spilne will fit in but will not engage the spline  :'(

Title: Re: 26-Spline vs. 22-Spline pass. CV
Post by: Gear on February 09, 2006, 12:36:44 AM

are you using a GV center or a vit center?  A Vit/x-90 26 spline stub axle will go into a GV center, but will stick out more as the shaft/spine is longer than a GV stub axle. 

Jeff

Title: Re: 26-Spline vs. 22-Spline pass. CV
Post by: pdasilva on February 09, 2006, 05:32:35 AM

I had a problem swaping a 22 spline cup to 26 pline cup,i just had the the inside of the 26 spline machined.I think the diffrence was about 0.5mm between the two inside diameters.

Title: Re: 26-Spline vs. 22-Spline pass. CV
Post by: Bobzooki on February 09, 2006, 01:17:19 PM

I just threw it all away and put 4Runner axles in...   ;D

Title: Re: 26-Spline vs. 22-Spline pass. CV
Post by: Agent Orange on February 09, 2006, 06:16:41 PM

Quote from: pdasilva on February 09, 2006, 05:32:35 AM

I had a problem swaping a 22 spline cup to 26 pline cup,i just had the the inside of the 26 spline machined.I think the diffrence was about 0.5mm between the two inside diameters.

0.5mm huh i wonder why, anyway i'll just swap in the one from the x-90 when i do my 4dr brake upgrade.

Quote from: Bobzooki on February 09, 2006, 01:17:19 PM

I just threw it all away and put 4Runner axles in...   ;D

is that toy axles front, and rear ?

thanks for the help everyone  ;)

Title: Re: 26-Spline vs. 22-Spline pass. CV
Post by: binkie on February 09, 2006, 07:46:32 PM

How easy is the 4-runner axle swap?

Thanks,

Marc