ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: kozaz on February 20, 2006, 07:55:42 AM

Title: ShockWorks Project Tracker Specs?
Post by: kozaz on February 20, 2006, 07:55:42 AM

Anybody know if there is a suspension lift on this tracker or not?  It is one of the projects from ShockWorks.

I do know that it has the following:

Tires = 32s
Body Lift = 2inch.

(http://i2.photobucket.com/albums/y4/kozaz/Zuks/Trackers/32s_2inBL_.jpg)

Title: Re: ShockWorks Project Tracker Specs?
Post by: stock93tracker on February 20, 2006, 08:02:29 AM

- 96 Tracker, Auto, 16V

- 32x11.50 BFG MT KO
- 15x8, 2.75 in. BS Wheels

- 2in Sky Body lift
- 2in suspension lift.  Springs and OME shocks and struts. Rear is too high and closer to 3 in.  Will lower it 1in later.
- Fender cutting and a little footwell massage

- 5.13 Diffs
- Spool rear
- Front diff / axles are stock, other than a beefed up front pinion support, for now....until I decide what direction to go for beef and a locker.
-  TrailTough 4:1 tcase gears

- Our new winch bumper
- Our new sliders.  These bolt on with a super strong, no drilling mounting setup

Title: Re: ShockWorks Project Tracker Specs?
Post by: Bobzooki on February 20, 2006, 09:12:40 AM

Do yourself a favor, and put a Sky Idler Arm in there.  You won't regret it!

One of the best c-note mods I've done on my rig!