ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: unbridled on February 22, 2006, 06:04:50 PM

Title: O-ring question
Post by: unbridled on February 22, 2006, 06:04:50 PM

Is there anything special about the petroworks distributor shaft and housing O-rings or are they plain old o-rings I can get in the plumbing section of the hardware store?

Title: Re: O-ring question
Post by: Shilly on February 22, 2006, 06:09:28 PM

I believe any properly sized o-ring from the autoparts store would do the trick. Don't know if I'd use the ones from the plumbing section, if only to make sure they were compatible with the oils and heat under the hood

Title: Re: O-ring question
Post by: unbridled on February 22, 2006, 06:17:41 PM

That's what I thought.  I'd get the ones from Petroworks but I just hate waiting for stuff to come in the mail!

Title: Re: O-ring question
Post by: bandit86 on February 22, 2006, 06:30:33 PM

any oring will work, if it's oil compatible

Title: Re: O-ring question
Post by: unbridled on February 22, 2006, 06:33:33 PM

cool thanks!