ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: track_this on February 25, 2006, 01:42:33 AM

Title: toyota cv shafts upgrade
Post by: track_this on February 25, 2006, 01:42:33 AM

hey i was wondering if anybody knew the maximum angles the toy cv's operate at. like what angle the inner cv will go to without binding and more importantly the outer cv that is in the spindle what is its operating angle?? any help would be very very appreciated. or if you know where to find some info let me know. thanks

shane

Title: Re: toyota cv shafts upgrade
Post by: 37kicker on February 25, 2006, 07:12:13 PM

I don't know the exact angle.  but with some checking could get some angles.   stan

Title: Re: toyota cv shafts upgrade
Post by: Bfunk on February 26, 2006, 01:35:22 AM

What toy shafts are you running, and how much modding is needed.
Brian

Title: Re: toyota cv shafts upgrade
Post by: brlj on February 26, 2006, 08:46:45 AM

Maybe Eric could put a sticky on the Toy article already posted to keep it at the top of the forum. What do you think Eric?

Bill

Title: Re: toyota cv shafts upgrade
Post by: track_this on February 28, 2006, 01:05:30 AM

ive searched but havnt havent found any toy article in here. ??? oh well ya eric see if you can dig up some info or stan if you could get any type of measurments for me that would be great. and what is the angle for the cv's stock????

shane

Title: Re: toyota cv shafts upgrade
Post by: Bfunk on March 01, 2006, 12:12:16 AM

C'mon Eric!  I know you don't have anything else going on.  Put the link up already, jeesh.
Brian

Title: Re: toyota cv shafts upgrade
Post by: 37kicker on March 01, 2006, 07:23:58 PM

Quote from: track_this on February 25, 2006, 01:42:33 AM

hey i was wondering if anybody knew the maximum angles the toy cv's operate at. like what angle the inner cv will go to without binding and more importantly the outer cv that is in the spindle what is its operating angle?? any help would be very very appreciated. or if you know where to find some info let me know. thanks

shane

did some checking the handy dandy angle finder if correct says 24-25 degrees .  stan

Title: Re: toyota cv shafts upgrade
Post by: wildgoody on March 01, 2006, 11:29:49 PM

I got 25* on the inner CV that has the cup,
and 40* on the outer CV without the cup.

I don't know if the CV will go that far without
breaking, but they will flex that far.