ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: ADavis on February 16, 2005, 03:36:43 PM
-
Hey all, what kind of lifts are available for to fit 33" tires on a tracker? My tracker already has a 6" lift, 3" suspension and 3"body from calmini. Thanks
Aaron
-
any lift you put on will still require fender trimming for a 33 inch tire. How much trimming depends on how much lift... ::)
Mike
-
JUST CURIOUS HAS ANYONE EVER USED ANY COIL SPACERS FROM SKY-MANU. THEY SUPPESEDLY ADD 2" OF LIFT
-
Spacers are fine if you want a lifted street truck. If you want the truck to perform off road you need a lift kit. (From Calmini) (second best is OME springs)
-
I have 33 s on mine with a 6" combo but there is some fender trimming neccessairy (if you write it that way) but that shouldn't be such a big prob if you want it :P ;D
-
me too , i have 33s on mine, i have the 6" combo but I probably only sit at 5 inches . i have longer shocks so end up with more travel .
Rather than cut the fender I had my inner floor pans taken in a few inches as they were rusty anyway, the back went on ok i just had to cut the lips of and I run different wheel arches
-
swing ur arms forward to get a couple inches clearnce. don't now if its a good idra i haven't done it but i have read a few posts on and i belive some one wrote a tech article on it may be on izook.
-
swing ur arms forward to get a couple inches clearnce. don't now if its a good idra i haven't done it but i have read a few posts on and i belive some one wrote a tech article on it may be on izook.
Oops, That'd be Mike H and the article would be on here ;)
-
I have calmini kit and 33 fit fine trim plastic bumper if still stock and small ajustment to inner fenders with a large hammer remove plastic covers first and install after the mod and no one will know. i was leary on my 97 with no rust but no looking back and no regrets much better ride over 32"
-
i just picked my self up a set of winter tyres as my MTR dont like the sticky mud , they are 34.12.50. Cheap make but agressive tread.
will post some pics soon.
-
i just picked my self up a set of winter tyres as my MTR dont like the sticky mud , they are 34.12.50.  Cheap make but agressive tread.
will post some pics soon. ÂÂ
34x12.5 + locker + alloy front housing :o
-
I fit 33x12.50's on mine with a Calmini 2" suspension and 3" body lift. They fit in the back on 15x10 w/ 4" BS, with little rubing but the front took ALOT of cuting, trimong, etc..... With the 3+3 Kit you should be able to do it with a little trimming and a hammer adjustment to the floorboards.
Zig
-
34x12.5 + locker + alloy front housing  :o
will let you know if its breaks, since the low crawler gears I dont take things so fast as i think its speed that kills . as in the speed the wheels are spinning
-
will let you know if its breaks,  since the low crawler gears I dont take things so fast as i think its speed that kills .  as in the speed the wheels are spinning
Locked? I trashed many CV's with 4:1 , 5.83's and in low 1st or 2nd gear :'( Let ua know how they hold up ;D
Zig
-
Locked? I trashed many CV's with 4:1 , 5.83's and in low 1st or 2nd gear :'(  Let ua know how they hold up ;D
Dang, Zig, I don't know. I've got the 4.24, and the 5.83's and ARB's and haven't broken a CV yet. I think it's just a matter of time, though, which is why I carry a spare.
-
Dang, Zig, I don't know.  I've got the 4.24, and the 5.83's and ARB's and haven't broken a CV yet.  I think it's just a matter of time, though, which is why I carry a spare.
:-/Better driving :-/ARB Vs Lockrite :-/ 31's vs 33's :-/I've to heavy of a right foot :-/
;DZig ;D
-
I fit 33x12.50's on mine with a Calmini 2" suspension and 3" body lift. They fit in the back on 15x10 w/ 4" BS, with little rubing but the front took ALOT of cuting, trimong, etc.....
Zig
Can I get away with 4" Back spacing and 33's?
I would have thought the tires would rub the frame when ya turn.  I'm working on a deal on a set of 15x8's with 3.5" Back Spacing.
-
My 15x10's are 4" of BS and just rub the frame alittle.
Zig