ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: ROSS on February 19, 2005, 12:56:20 PM
-
I NEED THE VACUUM LINE LAYOUT FOR 91 TRACKER W/EFI. JUST PUT SETUP ON MY 1600 IN MY SAMI. LOOKING FOR SOMEWHERE ONLINE TO GET INFO.
                  ROSS
-
Is that the diagram found pasted under the hood when you prop it up?  ???  If it is I can go a take a digital pic and post if you want.
-
THAT'S THE ONE I'D APRECIATE IT GREATLY
ROSS
-
Ok I'll be right back in a few minutes...
-
Here ya go chief:
(http://www.eye-irritant.com/august2004/vacuum01.jpg)
(http://www.eye-irritant.com/august2004/vacuum02.jpg)
-
THANKS THAT SHOULD HELP
ROSS
-
(http://www.eye-irritant.com/feb05/vacuum03.jpg)
(http://www.eye-irritant.com/feb05/vacuum04.jpg)
(http://www.eye-irritant.com/feb05/vacuum05.jpg)
(http://www.eye-irritant.com/feb05/vacuum06.jpg)
(http://www.eye-irritant.com/feb05/vacuum07.jpg)
(http://www.eye-irritant.com/feb05/vacuum08.jpg)
(http://www.eye-irritant.com/feb05/vacuum09.jpg)
(http://www.eye-irritant.com/feb05/vacuum10.jpg)
(http://www.eye-irritant.com/feb05/vacuum11.jpg)
-
Wow, now THAT's some good shots!
I noticed, that the Knutson Valve Backpressure Relief Line is incorrectly connected to the Blinker Fluid Reservoir Pressure Port - you might want to fix that, as it could lead to overheating of the Muffler Bearings!
::)
-
Wow, now THAT's some good shots!
I noticed, that the Knutson Valve Backpressure Relief Line is incorrectly connected to the Blinker Fluid Reservoir Pressure Port - you might want to fix that, as it could lead to overheating of the Muffler Bearings!
::)
;D ;D
True 1 to 1 scale shots ;D