ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: tracker8wr on February 23, 2005, 09:36:26 AM

Title: bent strut tower
Post by: tracker8wr on February 23, 2005, 09:36:26 AM

has anyone ever bent thier strut tower if so how did u rebrace it. drivers side is 3/4 of an inch shoter than the passengers side.

Title: Re: bent strut tower
Post by: wildgoody on February 23, 2005, 03:37:17 PM

You need to bend it back into position,
then build a strut tower brace, go look
at some ricer racer stuff, you'll get the
idea, this should help keep the strut
towers in place

Wild

Title: Re: bent strut tower
Post by: Suzuki1.8 on February 24, 2005, 01:33:07 AM

hey a sidekick sport has a strut tower stock. ITs a little wider then normal sidekick but you could narrow it and make it fit.(http://www.eye-irritant.com/feb05/suzuki 3.jpg)

Title: Re: bent strut tower
Post by: Hard_on_riggin on February 24, 2005, 01:47:24 AM

I have not bent a tower yet.....
There are no problems just opertunities

Oh great another opertunity to over come.
I think i will build a suport before i need it.
           Thanks.

Title: Re: bent strut tower
Post by: tracker8wr on February 24, 2005, 02:06:21 AM

i was planning on building a strut tower brace i was just wondering if anyone had tried to truss the tower and what success that gave them. also has anyone else had this problem.