ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mlovetripp0 on March 28, 2006, 10:37:05 PM

Title: has any one had this problem
Post by: mlovetripp0 on March 28, 2006, 10:37:05 PM
my new gears seem to take me places i couldn't go before. :)
does anyone have a remedy for this.cause i'd like to go back soon. ;D
(http://i35.photobucket.com/albums/d187/mlovetripp/Picture206.jpg)
(http://i35.photobucket.com/albums/d187/mlovetripp/Picture205.jpg)
Title: Re: has any one had this problem
Post by: Zukipilot on March 29, 2006, 04:21:49 AM
You could always buy a jeep Liberty  ::)

 ;D http://videos.streetfire.net/search/jeep/0/8093FEC5-D1CC-427A-B151-8ED0A91DF965.htm  ;D

OK maybe not  ;D

Zig
Title: Re: has any one had this problem
Post by: FNG on March 29, 2006, 05:58:15 AM
Quote from: Zukipilot on March 29, 2006, 04:21:49 AM
You could always buy a jeep Liberty  ::)

 ;D [url]http://videos.streetfire.net/search/jeep/0/8093FEC5-D1CC-427A-B151-8ED0A91DF965.htm[/url]  ;D

OK maybe not  ;D

Zig
LOL ;D
Title: Re: has any one had this problem
Post by: ADavis on March 29, 2006, 06:21:13 AM
 ;D That is just too funny.
Title: Re: has any one had this problem
Post by: mrfuelish on March 29, 2006, 07:20:35 AM
ATM   it fix everything.  ;D
Title: Re: has any one had this problem
Post by: locjaw on March 29, 2006, 07:34:53 AM
Quote from: mrfuelish on March 29, 2006, 07:20:35 AM
ATM   it fix everything.  ;D

OMG how true  ;D

and that buy a liberty is some funny shit too
jason
Title: Re: has any one had this problem
Post by: Quaddawg on March 29, 2006, 09:35:20 AM
Quote from: mrfuelish on March 29, 2006, 07:20:35 AM
ATM   it fix everything.  ;D

I think my ATM is broke.. it quit spitting out money last week..... and now I have all these pesky bills in the mail too... WTF!!
Title: Re: has any one had this problem
Post by: ack on March 29, 2006, 11:53:42 AM
Quote from: mlovetripp0 on March 28, 2006, 10:37:05 PM
my new gears seem to take me places i couldn't go before. :)
does anyone have a remedy for this.cause i'd like to go back soon. ;D
([url]http://i35.photobucket.com/albums/d187/mlovetripp/Picture206.jpg[/url])
([url]http://i35.photobucket.com/albums/d187/mlovetripp/Picture205.jpg[/url])


On a serious note, can you say "Salvage yard"?

Also Hawk's Strictly Suzuki. They have everything
Title: Re: has any one had this problem
Post by: hcgalvin on March 29, 2006, 12:56:12 PM
Quote from: mlovetripp0 on March 28, 2006, 10:37:05 PM
my new gears seem to take me places i couldn't go before. :)
does anyone have a remedy for this.cause i'd like to go back soon. ;D


Get Hi Steer :)

Or get FJ80 axles where the tie rod is positioned behind the axle, not in front. LOL.

 ;D
Title: Re: has any one had this problem
Post by: BigPig on March 29, 2006, 05:36:47 PM
I'm on board with you getting a Jeep Liberty.  Then you can part your Zuk's to the rest of us.  ;D
Title: Re: has any one had this problem
Post by: mlovetripp0 on March 29, 2006, 06:19:35 PM
geez
don't think i could ever part it out , its like a family member now
i live where there are no salvages for zuks   :'(
the vid is pretty funny though
Title: Re: has any one had this problem
Post by: kymike on March 29, 2006, 06:49:03 PM
if you can get them straight you can weld angle iron all the way down them both sides and it will increase the strenght greatly or if you get new ones do it to them before you put them on
Title: Re: has any one had this problem
Post by: mlovetripp0 on March 29, 2006, 09:28:37 PM
thnx for the help
has any one protected there 3rd with gussets and guard of any sort , i would like to protect mine so i'm looking for ideas? ???
Title: Re: has any one had this problem
Post by: bentparts on March 31, 2006, 04:42:08 AM
I've built a steel strap/ clamp for my front third.  It's made of 2"x1/4" steel, and mounts to the crossmember at the original mount, wraps around the output shaft area of the case, top and bottom, and bolts to the cross member above the pass side a arm, clamping down on the case as it is tightened down. All the edges are champhered to prevent any stress points. I've been running this set up for a while now, and it seems to work great. I have an ARB in the front and was worried about the extra stress on the housing. I could'nt get my hands on all the steel parts for an upgrade, so I made this to tide me over. So far so good.  There are photos somwhere in the archives of this.
Title: Re: has any one had this problem
Post by: mlovetripp0 on April 03, 2006, 09:07:14 PM
(http://i35.photobucket.com/albums/d187/mlovetripp/Picture220.jpg)
(http://i35.photobucket.com/albums/d187/mlovetripp/Picture219.jpg)
(http://i35.photobucket.com/albums/d187/mlovetripp/Picture221.jpg)
(http://i35.photobucket.com/albums/d187/mlovetripp/Picture222.jpg)
(http://i35.photobucket.com/albums/d187/mlovetripp/Picture223.jpg)
has anyone tried this?
Title: Re: has any one had this problem
Post by: Zukipilot on April 04, 2006, 03:53:28 AM
I have not tried that, but like Ack said, if youare looking for a stock solution or any random parts for either of your Zuk's call Hawk. They have whatever you need 1-888-SAMURAI.

A bunch of the Heep guys in my club make their own out of thick wall tubing or solid rods, instead od doing a factory replacement. I have also seen people sleeve larger tubing over the outside of the factory rod and weld it into place. They will both add strength, but wont move it out of the way.

Zig