ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bus_driver on April 12, 2006, 05:59:05 PM

Title: 2 1/4
Post by: bus_driver on April 12, 2006, 05:59:05 PM

that is what I want on the front of my 92 2 door......what would the spacer sizing be...

if 1.1/8 is 2 inch then like 1.2/8 would be correct????

Title: Re: 2 1/4
Post by: da_tub on April 12, 2006, 07:58:35 PM

inch and a half is what i put in. and got right around that number...

Title: Re: 2 1/4
Post by: BigPig on April 12, 2006, 09:06:11 PM

Are we talking about coil spacers?  ???

Title: Re: 2 1/4
Post by: chet on April 13, 2006, 08:31:46 AM

I think so hard to tell. for spacers its a 1 to 1.5 ratio so basically a 1" spacer gives you 1.5" of lift so a 1.5" spacer will give you roughly 2 1/4" inches.

BTW what is 1.2/8? that is not a measurement I know!   :P

Title: Re: 2 1/4
Post by: purpletracker on April 13, 2006, 08:40:45 AM

1 2/8= 10/8 ;D

Title: Re: 2 1/4
Post by: Uncivilized on April 13, 2006, 09:57:59 PM

I think he meant 1 1/4  ::)

Title: Re: 2 1/4
Post by: bus_driver on April 15, 2006, 10:47:56 PM

no i meant 1 inch and 2/8th of an inch......

thank you for all your help I will try the 1.5 and see from there