ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 87kevurai on April 14, 2006, 09:35:16 PM

Title: e brake from sami to toyota
Post by: 87kevurai on April 14, 2006, 09:35:16 PM

i just put toyota axels on my zook but i cant get any tension in the e-brake.  Does anyone have a solution for my problem?  any ideas would be greatly appreciated.  also who makes extended steel brake lines for zooks?

Title: Re: e brake from sami to toyota
Post by: bhaugen on April 19, 2006, 10:54:02 AM

OK here is what I did when I swapped mine over.  I used the original Samurai E-Brake Cable.  I made a metal tab around 2" long.  This was to make up the difference in axle width. 

Another thing to check is to make sure your shoes are set up.