ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: SiKiD_01 on May 10, 2006, 09:23:48 PM
-
seeing as i have the front diff and all out, i pulled the centre and i have welded it up.
(http://img.photobucket.com/albums/v621/sikid_01/DSC00765R.jpg)
(http://img.photobucket.com/albums/v621/sikid_01/DSC00769R.jpg)
i will also weld a flange on the RHS stub axle to run 2 left hand side shafts.
i am also making some front diff lowering brackets. i will post up picks as the get made.
i have also cut the rear guards to make room for 33"s under full flex.
(http://img.photobucket.com/albums/v621/sikid_01/DSC00687R.jpg)
(http://img.photobucket.com/albums/v621/sikid_01/DSC00686R.jpg)
NOTE: make sure you tape all the wires inside out of the way before you start cutting!
i am also working on a new upper A arm design for the rear diff. can anyone help me out?