ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: kcsmostwanted on May 15, 2006, 08:21:03 PM

Title: SAS project finished!
Post by: kcsmostwanted on May 15, 2006, 08:21:03 PM

Tested it out a little this weekend! Its working out pretty well.

Title: Re: SAS project finished!
Post by: kcsmostwanted on May 15, 2006, 08:21:46 PM

#2

Title: Re: SAS project finished!
Post by: kcsmostwanted on May 15, 2006, 08:22:15 PM

#3

Title: Re: SAS project finished!
Post by: Mikerpm4x4 on May 15, 2006, 08:29:38 PM

Very nice looking. Looks like a nice build. Did you run into any snags?

Title: Re: SAS project finished!
Post by: kcsmostwanted on May 16, 2006, 05:52:00 AM

A few snags, steering was a problem so I ended up going full hydro. rear shocks were not an easy task either. I ended up using some cheap rancho shocks in the rear.

Title: Re: SAS project finished!
Post by: dex on May 16, 2006, 05:38:37 PM

This is what i wanted to see. I want to know more    I need to know more. Got a web site with more info.

Title: Re: SAS project finished!
Post by: Mikerpm4x4 on May 16, 2006, 05:46:44 PM

Quote from: dex on May 16, 2006, 05:38:37 PM

This is what i wanted to see. I want to know more    I need to know more. Got a web site with more info.

Better yet more info on this site! ;) I would like to see some more detatiled closeup pics.

Mike

Title: Re: SAS project finished!
Post by: kcsmostwanted on May 16, 2006, 06:25:48 PM

sundayfamily.myphotoablum.com lots of pics

Title: Re: SAS project finished!
Post by: Chief on May 16, 2006, 09:14:26 PM

Looks good! How far you move the front axle forward? I was wondering if you could move a solid axle forward a couple of inches, and still retain the stock steering box set up or not.

Title: Re: SAS project finished!
Post by: ZeusZuki on May 16, 2006, 09:39:42 PM

Hi Chief,

When I built ZeusZuki I moved the front beam axle forward six inches over stock and still run a drag link - no hydro on this baby. We can not get hydro certified for street use here in NZ so drag link remains :). 2" - easy.

Moved the rear axle back four inches - but that was easy ;)

Let me know if you want more info and I will see what I can do :D

ZeusZuki 8)

Title: Re: SAS project finished!
Post by: Maroon Monsoon on May 16, 2006, 10:41:21 PM

very nice

Title: Re: SAS project finished!
Post by: Zukipilot on May 17, 2006, 04:22:57 AM

Very Nice!!!!! It almost looks like a Sammi coil kit adapted to fit a Kick  :-\ It appeard to perform well. How does it do on the road (besides the hydro steering).

Zig

Title: Re: SAS project finished!
Post by: kcsmostwanted on May 17, 2006, 03:31:05 PM

Yeah its a trailor queen. I have driven it on the road and its not bad, but nothing you would want to cruiz the interstate in. Suspension is way to soft. I have to give thanks to offlimits4wd. he gave me alot of pointers and sugestions.