ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: blyota91 on February 11, 2005, 08:53:11 AM

Title: Transmission
Post by: blyota91 on February 11, 2005, 08:53:11 AM

The tranny in my Samurai makes terrible noises, mostly in nuetral with the clutch out, obviously the input bearing.  Just curious how long I can run it like this, I haven't but am going to change the oil in it, I 've only put about a .1 miles on and done just one donut in the snow.  How hard are these to rebuild, would I need a press or any special tools?

Title: Re: Transmission
Post by: tracker8wr on February 12, 2005, 06:10:28 AM

a bearing extracor and a careful hammer. a press is idea but it is required. if the input bearing goes it can fuse to the input shaft or round out the hole bigger.