ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: JODY on June 05, 2006, 02:43:26 PM

Title: HELP Installing a 2 inch BDS susp. Kit Do I need read diff. tie rod spacer
Post by: JODY on June 05, 2006, 02:43:26 PM

If i need a spacer for the rear diff. what thickness would it have to be   2 inches
If so does anyone have the dimensions on how to make one

Title: Re: HELP Installing a 2 inch BDS susp. Kit Do I need read diff. tie rod spacer
Post by: Quaddawg on June 05, 2006, 06:40:09 PM

I didn't use one with that kit, but I think I should have...

I am going to put one on this summer, and yes, I am going to use a 2" spacer.

I haven't had any trouble per se, but I did pull the thing off once, and had to go back and use some serious grade 10.9 bolts on it.. haven't had any trouble since, and I have wheeled the piss out of since then..