ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mlovetripp0 on June 05, 2006, 10:25:29 PM
-
going to build up the zuk with full size axls .was wondering what r&p should i use with my 6.4 tcase gears and 5 speed.i rarely use 1st and 2nd mostly 3rd .when my rear stock axl came unglued.i want to go 37" and larger would this be to much of a strain on my motor and clutch?
-
Well Stan was running 39.5 Pit Bulls
and Jake Palmberg was running 44" boggers,
(Sammy) what did you have in mind for tire size?
-
i felt so little at mudstock i needed more clearence bad ,so figure bigger tires need more gear,and i think my tcase is low enuff .will i need more motor?
-
Need is such a poor choice here,
You Can Always Use More Motor ;D
-
I,m running 39.5 pit bulls with 6.50 gears & a 4 to 1 t-case works great . but the quest for a few more ponies is always there. stan
-
oh yea the rock star has 39.5 pit bulls with 5.12 gears 4 2 1 t-case works great also.
-
a buddy of mine has a sami witha 4cyl wrangler motor on propane with 37's. he has a local reduction box in it. think it is about 150:1. just ordered new diff gears and lockers. it is on d44's that have been narowed.