ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 87sammy on June 29, 2006, 12:49:04 PM

Title: samurai clutch problem
Post by: 87sammy on June 29, 2006, 12:49:04 PM

i have an 87 samurai and the clutch will not fully disengauge.  what is causing this to happen?

Title: Re: samurai clutch problem
Post by: dsumers on June 29, 2006, 05:53:19 PM

Is the cable adjusted too tight ???  If not could be the pilot bearing is worn out and is siezing to the input shaft.