ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mahimahimo on February 01, 2005, 09:34:19 AM
-
kinda got a nice hole in my exaust muffler.....im tryen to find a flow master or somethin along those lines.... but im curious what the factory piping size is....thanx
-mo
-
The exhaust is 2 inch off the cat. Thats where you should start. If the muffler is out then the rest of the pipe is probabally on the way out. Besides the pipe behind the muffler is tiny.
Mike
-
u think i can get a place to bend me 2 in piping for the rest of the muffler?
-mo
-
Sure, I would think any local exhaust shop could do it.
Mike
-
yea im gonna look around then.... any one have any inpute on a good muffler to get i was looken at a flow master 40 series
-mo
-
I have a 2 1/2 inch magna flow exhuast on mine. IT cost me three hundred bucks for a cat back exhaust installed ,at my local muffler shop. The sound is so much better now plus the top end power feels better.
-
i had my local exhaust shop run 2'' piping and a 18'' glasspack for $70 and it sounds pretty good and not annoyingly loud.
-
Calmini sells exhausts.
They have a nice sound.
http://www.puresuzuki.com/exhaust_system21.htm
Cwkick
-
I just bought a 40$$ dynomax turbo muffler and welded it myself, it has a nice throaty V8 sound and was cheap.
-
The flowmaster is a good choice they sound really good with a 4 banger. I got one on my rabbit and it sounds mean. ;D ;D
-
Hey breadbox,
What year is your Rabbit??
Cwkick
-
I have a 83 rabbit gti, and a 78 that is gonna be my stocker.
-
Do you need a Haynes manual for it?
Cwkick
-
Na, I am good. Thanks.
-
the local shop in town bent mine and installed it for $100. plus i had them turn it out in front of the rear tire.