ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: CJ11 on July 12, 2006, 02:38:58 PM
-
Got all ofe the parts and it all bolted up in less then 2 hours and what a differance stops on a dime. When i did a search on the subject and there was some questions abot size diff on the calipers the 2 door the piston was 1 3/4 in and the 4 door was 2 1/8 (give or take a bit it was pouring i was soaked) the whole caliper was a lot bigger and stronger looking and the vented rotor is nice as well. the one thing was the backing plate I did not have to trim or bend at all Is that the norm or will there be a problem later on. The pics of the calipers are here. Thank you every one for yor help Chris.
-
Nice, did you buy the loaded calipers?? How much were they? What did you pay for the rotors?
-
I got the calipers from a you pull it $10 ea. Loaded the pads were like new. The rotors were $45 ea at autozone but they beat the price of advanced auto at $19.99 ea and with a couple of returns i paid $9.09 for the 2 at under $30 and 2 hours work (no trimming the backing plate) cant beat it thanks for all the info and help chris..