ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Sami86 on July 18, 2006, 11:33:27 PM

Title: How to make sliders
Post by: Sami86 on July 18, 2006, 11:33:27 PM

i would like to know how to make this 2x2 angle iron into rock sliders  for my Sami and how to mount them as well........

Title: Re: How to make sliders
Post by: ack on July 19, 2006, 08:04:40 AM

Try a search for slider at Ack's FAQ (the link is in my signature).

Both are fabbing articles that should give you some good ideas on the subject..

Hope this helps!

Title: Re: How to make sliders
Post by: Drone637 on July 19, 2006, 10:15:59 AM

There is a quick description of making a set of sliders from some large angle located over here (http://www.zukiworld.com/forum/index.php?topic=12851.msg119860#msg119860) from a previous thread.

If you do a search on Sliders at the top of the page, you can find some really good writeups on what people have done.

Title: Re: How to make sliders
Post by: wildcat on July 21, 2006, 06:33:24 PM

Fairly simple

(http://img.photobucket.com/albums/v521/islandtrooper/My%20Sami/sliders/DSCF1136.jpg)
(http://img.photobucket.com/albums/v521/islandtrooper/My%20Sami/sliders/DSCF1139.jpg)

(http://img.photobucket.com/albums/v521/islandtrooper/My%20Sami/sliders/DSCF1149.jpg)
(http://img.photobucket.com/albums/v521/islandtrooper/My%20Sami/sliders/DSCF1151.jpg)

Just make sure you weld a round piece of steel the same size as your frame to the slider or the frame so it will spread the load and not rip your frame.