ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: beerman on July 21, 2006, 04:44:41 PM
-
i did a SEARCH, but did not find what i was looking for :'(
some Norwegian friends are going to build roll cages in a canavas top sidekick/tracker and a canavas top SJ 413 swb
if anyone can post some good pictures of a HAGEN cage or some good cages and point out where they mount to the floor, and measurements...
this whould be nice!
thank you...
-
anybody got a picture of an internal rollcage?
-
i have one i built, not a great pic of it though
(http://www.imagestation.com/picture/sraid207/p74a30af0bc8cea8e059435df3c18574d/eea72b76.jpg)
-
just what we are looking for, how did you mount on the floor?
did you mount it to the frame?
som pictures taken inside the car whould be GREAT!
thank you!
-
sorry dude, GF has the camera on holidays.
so far i have just welded a plate to the bottom of the pipe and bolted it through the floor. will make conectors to the frame and bolt them through the floor to the roll cage mount. should be even more solid then. it doesn't move at all now.
it was my first cage and it tuned out good so far.
-
heres what i have....
(http://www.imagestation.com/picture/sraid204/p657b7ba206fa68111b343331872e0c1c/ef4d291e.jpg)
(http://www.imagestation.com/picture/sraid204/p791b00483831318cfbd16685d47a5118/ef4d28f8.jpg)
(http://www.imagestation.com/picture/sraid204/pc8accd6a5590cf123d72588788594519/ef4d28cd.jpg)
-
Here are pics of the calmini cage i installed in mine.
-
heres what i have....
([url]http://www.imagestation.com/picture/sraid204/p657b7ba206fa68111b343331872e0c1c/ef4d291e.jpg[/url])
([url]http://www.imagestation.com/picture/sraid204/p791b00483831318cfbd16685d47a5118/ef4d28f8.jpg[/url])
([url]http://www.imagestation.com/picture/sraid204/pc8accd6a5590cf123d72588788594519/ef4d28cd.jpg[/url])
doesent look like there is much headroom for the rear passengers :'(
this was the same problem that brent had in designing the cage he built for mine. the front works good , the back didnt work at all. i'v been toying with redesigning the top to give more headroom so a rear cage would work. we'll see :-\
jason
-
if anyone can post some good pictures of a HAGEN cage or some good cages and point out where they mount to the floor
I have pics of how Mike's cage mounts to the floor(but no measurements, I don't think they're needed for any shop), if he doesn't mind I will post them up for all to see, I'll send him a PM to find out.
-
if anyone can post some good pictures of a HAGEN cage or some good cages and point out where they mount to the floor
I have pics of how Mike's cage mounts to the floor(but no measurements, I don't think they're needed for any shop), if he doesn't mind I will post them up for all to see, I'll send him a PM to find out.
P-L-E-A-S-E do ;D
thank you guy's :D
-
heres what i have....
([url]http://www.imagestation.com/picture/sraid204/p657b7ba206fa68111b343331872e0c1c/ef4d291e.jpg[/url])
([url]http://www.imagestation.com/picture/sraid204/p791b00483831318cfbd16685d47a5118/ef4d28f8.jpg[/url])
([url]http://www.imagestation.com/picture/sraid204/pc8accd6a5590cf123d72588788594519/ef4d28cd.jpg[/url])
doesent look like there is much headroom for the rear passengers :'(
this was the same problem that brent had in designing the cage he built for mine. the front works good , the back didnt work at all. i'v been toying with redesigning the top to give more headroom so a rear cage would work. we'll see :-\
jason
i'm 5'8" and my head doesn't touch. plus, there is never really anybody back there except for my kids, or tools
plus, to make it fit under the soft top or hard top it has to come down int eh back like it has
-
I asked Mike for these pics a while ago, I was going to have one built for my white truck, but I had some body mount problems and now have a new truck, so I will be starting on this again ;D
I specifically like how the front section is mounted to the upper floor, can't really be tripped over, and in the rear that definatly saves all your storage space.
(http://www.zuwharrie.com/gallery/albums/userpics/11825/frontrollbar.JPG)
(http://www.zuwharrie.com/gallery/albums/userpics/11825/rearrollbar.JPG)
-
I am one of the norwegian friends of Beerman that is looking for photos of rollcages.
It is for this car i need som cage ideas.
-
I am one of the norwegian friends of Beerman that is looking for photos of rollcages.
It is for this car i need som cage ideas.
Can you go anywhere but straight ahead in that vehicle? Those tires are huge...
-
It works fine. But i had too cut out in the front.
Good clearing ;D
-
i really like you'r car with 33's ;D
it looks really bad...
-
heres what i have....
([url]http://www.imagestation.com/picture/sraid204/pc8accd6a5590cf123d72588788594519/ef4d28cd.jpg[/url])
It looks like that just covers the rear. How much protection in a rollover do you guys think the standard top offers the front seat passengers? I've seen pics of trackicks from high speed rollovers and they are pretty well mangled. But a wheeling rollover would be a low speed roll. I wonder how it would hold up?
-
it is not done yet, the front is getting a half exo that will tie into the rear cage.
i have seen a few kicks roll over and the top is usually fine. seen a few that didn't even break the windshield.
-
heres what i have....
([url]http://www.imagestation.com/picture/sraid204/pc8accd6a5590cf123d72588788594519/ef4d28cd.jpg[/url])
It looks like that just covers the rear. How much protection in a rollover do you guys think the standard top offers the front seat passengers? I've seen pics of trackicks from high speed rollovers and they are pretty well mangled. But a wheeling rollover would be a low speed roll. I wonder how it would hold up?
I think it would be much better than nothing like in the rear(stock) it's nice to have 'something' to help protect rear passengers in a slow-motion flop over.