ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Sami86 on July 23, 2006, 12:01:33 AM

Title: Sammy Questions
Post by: Sami86 on July 23, 2006, 12:01:33 AM

ok i went crawling to day and was having a bit of what i think was vapor lock..... i got at a/or about a 45 degree angle and it would start running really ruff..... i mean idle was ok.... but give it gas and it wouldnt go over 2000 RPM and put out. but when i was sitting level all was ok....so how do i prevent this in the future.... and no get a 1.6 or FI ranting so plz help......

Title: Re: Sammy Questions
Post by: Sami86 on July 23, 2006, 11:55:55 AM

please anybody?

Title: Re: Sammy Questions
Post by: locjaw on July 23, 2006, 12:07:19 PM

do you have a stock or aftermarket carb?
that info would help
jason

Title: Re: Sammy Questions
Post by: Sami86 on July 23, 2006, 01:28:47 PM

its the stock carb....

Title: Re: Sammy Questions
Post by: Sami86 on July 24, 2006, 10:43:30 AM

anyboby??

Title: Re: Sammy Questions
Post by: john1974 on July 24, 2006, 10:56:14 AM

was it stalling out? fuel mixture could be off, check front window on carb to see fuel level.  if u cant see it when truck is at idle, take a needle nose and while your looking at the window pinch off the fuel line going into carb, if u see the fuel level start to come down your float is stuck open. 

maybe a vac line leak too, check around all the lines. make sure there all good.