ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RGERBER on August 13, 2006, 06:33:43 PM

Title: Door hinges
Post by: RGERBER on August 13, 2006, 06:33:43 PM

Can anyone offer ideas on how to get the door hinge screws out, i want to install s.s. hinges and move my mirriors to the front hinge so i can take my doors off and still have mirriors.

Title: Re: Door hinges
Post by: Sami86 on August 13, 2006, 08:39:38 PM

i ground the heads off then the stud just unscrews.... then i cut the top over lapping part of the hinge off and cut half of the pin off and now i can take my doors off with no problem.

Title: Re: Door hinges
Post by: RGERBER on August 13, 2006, 09:00:05 PM

you cut the philips head off the door hinge screw ? how did you get behind the head ?

Title: Re: Door hinges
Post by: zuki4fun on August 14, 2006, 06:47:50 AM

take a big tip screw driver and but itin the screw then hit the screw driver with hammer free up all the corrosion and they should spin out.

Title: Re: Door hinges
Post by: RGERBER on August 14, 2006, 12:02:21 PM

YEA I TRIED THAT, I USED A IMPACT DRIVER, AND A AIR GUN, BROKE THE TIP.