ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Sami86 on August 18, 2006, 11:59:54 PM
-
ok i have an 86 sammi with the stock 1.3. I am wondering what would cause the 2nd barrel of the carb the one closeset to the block to not open more than 3mm. while the motor is running ... i mean i can open it more while running but at throttle even full throttle it only opens about 3mm. i know there is an electrical vac. switch/little green box that the vaccume linkage connects to for that barrel what is suppose to engage that switch? ???
-
the second barrel opens on vacum and you will not get enough to open it if it is not under a load setting still wont do it