ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: HUMZUKI on January 28, 2005, 03:32:27 AM

Title: T-Case mounts
Post by: HUMZUKI on January 28, 2005, 03:32:27 AM

I just ordered Calmini's 5:14 gears. What T-case mounts are yal using and what do you think of them? I know I'll probably need an after market mount/skid job. Im diggin TrailToughs even though Its the most expensive. What if I just welded a bunch of 1/4" plate to the stock stuff and used some polly mounts? Anybody gusset there stock stuff? Pic's?
I need to get under there and look,,,but Im sure I can really buff the existing stuff up with some well placed plates, but I don't want to make it so I cant get the case or trany out.

Title: Re: T-Case mounts
Post by: ROSS on January 28, 2005, 12:17:46 PM

ROCKY-ROAD.COM CHEK THERE'S OUT I LIKE MINE .IT DON'T GIVE AT ALL

                                              ROSS

Title: Re: T-Case mounts
Post by: rockrat on January 28, 2005, 02:51:21 PM

With those gears I would not run POLY just more stress on the case buy brand new stock rubber

Title: Re: T-Case mounts
Post by: Natebert on January 28, 2005, 03:50:17 PM

We made a 'bucket' for our Sammy case which was an exact bolt in to the stock t-case mounts.  Used 1" square stock and 1/4" flat iron.
Worked great.  I'll see if I can get a couple of pictures.

~Nate

Title: Re: T-Case mounts
Post by: Natebert on January 28, 2005, 04:00:57 PM

This is the only one I've got, sorry.
~Nate
(http://www.eye-irritant.com/august2004/DCP_5356.jpg)