ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: ROSS on January 26, 2005, 12:25:48 PM
-
HOW DO YOU GET THE CHECK ENGINE LIGHT TO STOP
FLASHING? MY FRIEND JUST PUT IN A NEW MOTOR AND
IT WON'T STOP . PROBLY DUMB ?
ROSS
-
What year is it? Every OBD II I've worked on if the light was flashing it indicates a misfire.
-
EITHER 89 OR 90 NOT SURE.MOTOR RUNS SMOOTH AND STRONG. HE'S WANDERING IF HE PLUGGED SOMETHING IN WRONG. CAN'T CHEECK IT MYSELF I'M IN UTAH. TO LATE TO CALL HE LIVES IN MICHIGAN. IT WASN'T ON BEFORE WITH OLD MOTOR.
ROSS
-
Don't know anything about OBD I, sorry. Someone with a Factory Service Manual may be able to help.
-
THANKS ANYWAY
ROSS
-
Maybe this will help:http://www.troublecodes.net/suzuki/index.shtml
-
The real question is, do ODBI/early trackick engine CEL lights flash at all as a warning sign? Might've plugged something in wrong or have a faulty connection due to corrosion or something somewhere. Does it run good?
-
Tell him too take out the driver side speker in the front and flip the toggle switch by the colum.
-
If it was the switch, it would be on all the time. I'm guessing it's something else - I've never seen the CEL flash on any of my OBD I Kicks.
-
Mine flashed for a few miles (like 10-20) before hitting one of the service intervals (when Suzuki "did not" program the light to come on. At least that is what the Service Department told me ::)
Zig