ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: edjeep1 on January 23, 2005, 10:58:14 AM

Title: dist. vac ?
Post by: edjeep1 on January 23, 2005, 10:58:14 AM

i need to know where to pull vac from for the dist. on a 87 sammy ???

Title: Re: dist. vac ?
Post by: ebewley on January 24, 2005, 03:39:46 AM

Quote

i need to know where to pull vac from for the dist. on a 87 sammy ???

Stock carb?

-Eric

Title: Re: dist. vac ?
Post by: edjeep1 on January 25, 2005, 05:45:34 PM

yes i had a weber but went back to stock just runs better the problem is i cant remember where all the dang vac lines go ??? >:(

Title: Re: dist. vac ?
Post by: AZScr4mbl3r on January 26, 2005, 12:39:37 AM

Hey,
Passenger side of the carb there are two ports. I have used both didn't notice any difference although one has an orifice and one is same diameter as the tube. I eliminated the Tee and run straight to the port. I think the Tee went to egr which I blocked off....

-Allen

Title: Re: dist. vac ?
Post by: azrocktrash on January 26, 2005, 02:06:55 AM

make sure the one you use has vacume only when you rev the engine or it won't time properly,because the vac advance will be advaced at idle.
   oscar

Title: Re: dist. vac ?
Post by: edjeep1 on January 26, 2005, 04:00:21 PM

thanks for the help man these things are fun dont know why i didn't get one sooner danm jeeps  >:(