ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: PSYKOCHI on September 22, 2006, 05:44:34 PM
-
Guys I have a 95 Geo Tracker "Psyko Chiwaawaa" that I drag race. Although the engine is pretty much stock w/ a header, I want a HP increase without killing my budget. I know the rods can't take a whole lot of stress without rebuilding the bottom end. I do want to stay with the Zook 1.6L. I do not want to swap engines. The 1.6 is lightweight -- I just want a little more HP. I do have a '96 Tracker 1.6L 16V engine but I don't want to run the 16V head. I want to use my 8V head on this engine. So far the truck weight is 1840lbs w/o the driver.
-
Cam, exhaust, intake, the basics... eliminate the Cat if you can.. that type of stuff.. how much of that have ya done??
how about a ''lil" shot of nitrous? :o
-
Wide open header with a 14in extension. Cam? I need one don't know where to find one. More fuel -- how can I increase the amount of fuel to a TBI? No headwork as of yet. I would like to stay away from NOS.
I like normally aspirated.  I would like to use a good 2bbl carb.
-
you def. want to keep the 16v head dont, i repeat dont use the 8v, try porting the head, depending on your budget theres a guy who built his 1.6l 16v and turboed it. hes now selling it for $2200 for everything including fuel management
-
One word.....LS1
-
http://www.teamswift.net/viewforum.php?f=7
http://www.rocky-road.com/kickpulley.html
(http://www.rocky-road.com/media/SamuraiCamSprocket.JPG)
(http://www.rocky-road.com/media/Sidekick_UnderDrive.jpg)
http://www.hawksuzukiparts.com/
Here at HAWK STRICTLY SUZUKI we are big in
cams. We have a wide variety for you to
choose from or we can special make any cam
for any application. Call us! Here are some of
the more popular models:
New Stock OEM $99 w/o core
Phase 1 torquer $100 w/$25 core
(http://www.hawksuzukiparts.com/images_parts/part_camshaft.gif)
-
you def. want to keep the 16v head dont, i repeat dont use the 8v, try porting the head, depending on your budget theres a guy who built his 1.6l 16v and turboed it. hes now selling it for $2200 for everything including fuel management
I have read someplace (online) -- one guy tested the 16V vs. 8V head and he said the 8V flowed better. I can't remember were I saw it, I will look for it again. I have always heard a 16V will outflow an 8V but for some reason this was a different case. I will try and find it. I have both heads -- I could take them to a friend of mine and have him flow them both. Yes I do understand 16V motor has more HP -- It also has MPI. I am still open for suggestions -- I haven' got rid of my 16V head yet.
-
One word.....LS1
You have a very good idea!!
-
port the 16v head, you wont be disappointed, trust me. alot of people underestimate the 16v motor. the guy i told about that built and turboed his 16v said he raced his friends stock wrx and he said he beat it by 3 cars lengths
-
port the 16v head, you wont be disappointed, trust me. alot of people underestimate the 16v motor. the guy i told about that built and turboed his 16v said he raced his friends stock wrx and he said he beat it by 3 cars lengths
--------------------------
A stock WRX runs in the 13s off the show room floor -- I am impressed....... :o 1/4mi?
-
you def. want to keep the 16v head dont, i repeat dont use the 8v, try porting the head, depending on your budget theres a guy who built his 1.6l 16v and turboed it. hes now selling it for $2200 for everything including fuel management
I have read someplace (online) -- one guy tested the 16V vs. 8V head and he said the 8V flowed better. I can't remember were I saw it, I will look for it again. I have always heard a 16V will outflow an 8V but for some reason this was a different case. I will try and find it. I have both heads -- I could take them to a friend of mine and have him flow them both. Yes I do understand 16V motor has more HP -- It also has MPI. I am still open for suggestions -- I haven' got rid of my 16V head yet.
The SOHC 16v head of the 1.6 outflows the DOHC 16v head of the Suzuki Swift GT. I'd be highly surprised if the 8v head outflowed it. Keep the 16v and get some cam work done on it and you can use the 1.3 flywheel as it is lighter than the 1.6. Mine responded well to a cam regrind and an adjustable cam gear. I had also done the complete exhaust on mine. The next step was going to an interceptor for the fuel and ignition as these have given reasonable gains. A little pocket porting won't go astray either. You may want to hunt around for different diff ratios. Maybe a 5.38 or a 5.62 to get of the line quicker. You'll need to do some calculations to find your best option.
-
you def. want to keep the 16v head dont, i repeat dont use the 8v, try porting the head, depending on your budget theres a guy who built his 1.6l 16v and turboed it. hes now selling it for $2200 for everything including fuel management
I have read someplace (online) -- one guy tested the 16V vs. 8V head and he said the 8V flowed better. I can't remember were I saw it, I will look for it again. I have always heard a 16V will outflow an 8V but for some reason this was a different case. I will try and find it. I have both heads -- I could take them to a friend of mine and have him flow them both. Yes I do understand 16V motor has more HP -- It also has MPI. I am still open for suggestions -- I haven' got rid of my 16V head yet.
The SOHC 16v head of the 1.6 outflows the DOHC 16v head of the Suzuki Swift GT. I'd be highly surprised if the 8v head outflowed it. Keep the 16v and get some cam work done on it and you can use the 1.3 flywheel as it is lighter than the 1.6. Mine responded well to a cam regrind and an adjustable cam gear. I had also done the complete exhaust on mine. The next step was going to an interceptor for the fuel and ignition as these have given reasonable gains. A little pocket porting won't go astray either. You may want to hunt around for different diff ratios. Maybe a 5.38 or a 5.62 to get of the line quicker. You'll need to do some calculations to find your best option.
Thanks for the info -- I am not planning on getting rid of the 16V head -- I just want more info before I drop any more money into my little hot rod. With the very limited availability of speed parts for the Zook motors it makes gaining HP a little difficult and a deep gouge into the light budget.
-
Or maybe some mods like this one.......
-
Or maybe some mods like this one.......
more info please... :o :o ;D
-
Or maybe some mods like this one.......
more info please... :o :o ;D
it has stacks, what more info do you need ;D
jason
-
Or maybe some mods like this one.......
more info please... :o :o ;D
it has stacks, what more info do you need ;D
jason
1/4 times?, how much hp?... ;D
-
there used to be an 850 hp samurai drag racer for sale on ebay about every 6 months, i think it finally sold though.
The seller was offering it with the drive shafts removed because he did not want the buyer to drive it away from his shop, said it was dangerously fast and unstable.
-
Or maybe some mods like this one.......
:o :o :o :o HOLY CRAP!!!!!!! IS THAT YOURS?? Instant woodeeeee!!!!!
Sir I am most humbled!!
What a gorgeous Tracker.......I am impressed,Sir!! I would like to see more pics, info, time in the quarter -- NIIIIIIIICCCCCEEE!!! WOW!!! Where is the Tracker located - It almost looks like Orlando Speed World Pits. That is a nice ride!!
-
sorry ,its not mine. This is mine....
-
sorry ,its not mine. This is mine....
;D  What year is your Tracker? 4x4? Did you swap a late model XL V6? SWEEEEEET!!! How is the HP and the handling?? I hope someone comes up with a header setup for it.
Did you take the pic on the other Tracker? I went to CarDomain and tried to find it -- couldn't.
Where did you find it -- I would like to get more info on it.
-
have you did a Gear Sets like 5.83
-
I run the stock 5.12s with a Roadless Gear mini-spool and Calmini 4140 axles. That has held up very well (so far). I broke the stock axles with a stock engine.
-
A friend of mine at work told me -- In Puerto Rico drag racing Trackers they replace the 1.6L Suzi engines with 2.4L Toyota engines -- went online with LCEngineering -- 1200 hp |removethispart|@ 11,000 rpm out of a 2.4L 22R --- :o HOLY CRAP!!! I don't about 1200 hp in a Tracker -- I need wings and some severe down force.
Any body witness a Toyo engine in a Tracker?? I would like to get some info from them.
-
Does anyone know this Tracker -- I would like to get more info on it.
-
i like how they still have the spare tire on the back, like it will be usefull other than weight. :) that thing is awsome btw.
i have also wanted to build a drag sidekick someday, i have a 2.2 dodge turbo motor that is in my daytona that puts out 275hp, and 300 ft lbs of torque that i would like to put in it :) I think it would just be a blast to drive.