ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 96Kicker on October 04, 2006, 11:17:11 AM

Title: Motor mount
Post by: 96Kicker on October 04, 2006, 11:17:11 AM

Just curious if anyone has had to change the drivers side motor mount on a 94 track/kick with a 8 valve. Mine decided to go south on a bumpy road. I assume you just put a piece of wood under your engine and jack it up untill you have enough clearance to replace the mount.

Any ideas on this? Easier way?Hints?

Title: Re: Motor mount
Post by: 96Kicker on October 05, 2006, 04:32:21 PM

28 views, come on people. Help a new guy out

Title: Re: Motor mount
Post by: blakester1123 on October 05, 2006, 05:06:44 PM

that will work, loosen the bolts jack it up take the bolts out jack up more then pull out the mount  put the new one in and bolt it all up.

Title: Re: Motor mount
Post by: 96Kicker on October 06, 2006, 12:36:40 PM

Thanks Blake

Title: Re: Motor mount
Post by: crikeymike on October 06, 2006, 02:33:33 PM

Yeah, it is easy.  Remove the mount from the engine and frame while the engine is supported, then match up the new one with the old for installation.