ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mverley on October 04, 2006, 09:41:19 PM
-
So I finished up my hydro assist a few days ago…thought I’d post a pic
Everything came from Surplus Center; the cylinder is a 1.5�x6�. The total cost was about $100. If anybody is interested I'll post P/N's and more details. I’m using a Celica box and a Saginaw pump; porting the box took about 1 hour and wasn’t too difficult…easier than the couple of Saginaw boxes I’ve done. I didn’t have to do any pump mods due to the fact that I'm running a big pump, the Celica box is so small, and the stroke on the ram is relatively short. The ram moves just about as fast as I can spin the wheel. We’ll see how well it works at Powerfest ;D
(http://www.cannonbeachconstruction.com/images/storage/Samurai/hydro.JPG)
-
lookin good matt
crushers will put it to the test 4 sure ;)
see you there
jason