ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: TysonS on October 06, 2006, 02:19:36 PM

Title: Maxima CV's
Post by: TysonS on October 06, 2006, 02:19:36 PM

ok, here is my question. 

I don't have a calmini kit and i havn't widened my ifs.

I am running 2 1/4" coil spacers but would like the extra strength and steeper opporating angle to a maximas.

Can I still run the Nissan Maxima cv's following the swap hagen did?

Will I have any clearance issues with the stronger cvs?

Thanks yo  ;D

Title: Re: Maxima CV's
Post by: 37kicker on October 07, 2006, 04:54:36 PM

the toyota conversion is easier and uses store  bought cv,s not custom.   stan

Title: Re: Maxima CV's
Post by: satan inside on October 07, 2006, 10:37:29 PM

what is involved with the toyota conversion?

Title: Re: Maxima CV's
Post by: 37kicker on October 09, 2006, 03:29:38 PM

you must do the hagen widening some grinding some inner axle mod.  stan

Title: Re: Maxima CV's
Post by: TysonS on October 09, 2006, 07:55:37 PM

is it worth all the work, any writups?

Title: Re: Maxima CV's
Post by: FNG on October 10, 2006, 09:40:20 AM

Quote from: TysonS on October 09, 2006, 07:55:37 PM

is it worth all the work, any writups?

it is worth the work and the kit is well put together i installed mine in july and i run 34s and lockers and have had no problems at all.toy cvs are the way to go

Title: Re: Maxima CV's
Post by: 37kicker on October 11, 2006, 02:47:57 PM

i'm running 16x39.5x15 pitbull rockers & not hav'n problems.     ;D    stan

Title: Re: Maxima CV's
Post by: TysonS on October 11, 2006, 07:51:58 PM

is that with a alloy housing  ;D ???

Title: Re: Maxima CV's
Post by: Mikerpm4x4 on October 11, 2006, 08:13:06 PM

Stans toy kit is the way to go. Almost every trackick in the Rpm club is running the toy kit. It works very well. I have it in the rockstar with 39.5 pitbulls also, chunk with 37 MTRs, blake also 37 MTRs , Stu 36 Irocks....... Dan...ECT you get the point.

Title: Re: Maxima CV's
Post by: Fredo on October 11, 2006, 08:31:35 PM

Any pics of the toy's kit?

Fredo

Title: Re: Maxima CV's
Post by: Mikerpm4x4 on October 11, 2006, 08:39:45 PM

Quote from: Fredo on October 11, 2006, 08:31:35 PM

Any pics of the toy's kit?

Fredo

I had pics of it but my computer recently crashed from power problems and I lost everything. I think there was a thread with some pics. i will see if I can find it.

Mike

Title: Re: Maxima CV's
Post by: Mikerpm4x4 on October 11, 2006, 08:45:19 PM

http://www.zukiworld.com/forum/index.php?topic=9229.0

Found it. The begining has red Xs but the end of the topic has installed pics

Title: Re: Maxima CV's
Post by: Fredo on October 12, 2006, 07:58:20 AM

Quote from: Mikerpm4x4 on October 11, 2006, 08:45:19 PM

[url]http://www.zukiworld.com/forum/index.php?topic=9229.0[/url]

Found it. The begining has red Xs but the end of the topic has installed pics

Thank you very much Mike!

Fredo

Title: Re: Maxima CV's
Post by: bzzr2 on October 12, 2006, 08:45:11 AM

how much more lift can be safely run with these cv's?

Title: Re: Maxima CV's
Post by: 37kicker on October 12, 2006, 03:27:15 PM

the kit is not for getting more lift but for cv strength. but if your good at fabing anything is possible i'm run'n 39.5" tires,  might go bigger after new mods. ;D ;D    stan

Title: Re: Maxima CV's
Post by: bzzr2 on October 13, 2006, 07:00:31 AM

thanks, i wasn't sure if these CV's could operate safely at steeper angles or not.  i'm not good at fabbing..  i really have no plans to ever go bigger than 32x10.5