ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: TrAkLsI on October 12, 2006, 10:18:25 PM

Title: bolt in axles trackick
Post by: TrAkLsI on October 12, 2006, 10:18:25 PM

I was looking at my brothers fj40, and notice that the front perches for the leafs was being held in by bolts. The fj have nice beefy axles and they have only 3 bolts on 1 side holding the perches on the axles and it was'nt even welded in.  So JW why don't someone make a kit with perches and directions to tell us where to drill so we can bolt the leafs in with toy axles.  After, drive it to a certified welder and get it welded in.  So the rest of us untalented guys can have a nice lifted STRAIGHT axle tracker. ;D

Title: Re: bolt in axles trackick
Post by: john1974 on October 13, 2006, 06:38:26 AM

Due to the fact thats its highly dangerous.   :)  better off bringing perches and axles to a guy who can weld, then weld them drive them home..  If you have a pickup, or friend who does... your golden.

Title: Re: bolt in axles trackick
Post by: Rhinoman on October 13, 2006, 08:05:09 AM

Tony Bennet (aka Red Baron) was talking about this the other day. I can't visualise the Toy set, I need pics! It sounds a bit dodgy but if it works for Toyota it can't be all that bad.

Title: Re: bolt in axles trackick
Post by: TrAkLsI on October 13, 2006, 07:13:32 PM

NO, someone needs to design the perches, and sell it to us we will supply out own toy axles, leafs etc.etc.  thanks for your input guys :D

Title: Re: bolt in axles trackick
Post by: TrAkLsI on November 01, 2006, 11:00:09 PM

Anybody got any more input.. ;)